High durability powder coatings MT-800
Product Description
MT-800 is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 powders are available in a wide range of colours and gloss levels and can be custom matched to the user’ s requirements.
Powder properties
| Typical value | |
| Chemical Type | Polyester TGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule (object temperature) | 15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
| Stoving Schedule
(object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
| Adhesion
(2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
在线联系供应商
Other supplier products
 |
Imitation porcelain light luxury home decoration powder | Scope of application: High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc. Surface effect of anti-porcelain sw... |
 |
Polyester-Epoxy Powder Coating | Product Introduction:This series of products is a thermosetting powder coating made from a mixture of saturated polyester resin, corresponding cu... |
 |
Ultra Weather-resistant Polyester Powder Coating | 1. Chlorinated Polyether (CPE) Powder Coatings High-Performance Industrial Protection & Insulation As a leading China-based manufacturer, we ... |
 |
Frame & chassis powder coatings MT-A400 series/powder coating composition | Coating characteristics: – High corrosion resistance – Excellent bending resistance – Excellent stone impact resistance and UV... |
 |
PVDF fluorocarbon coating | Product Introduction Used for aluminum substrate surfaces such as building curtain walls, doors and windows, ceilings, roofs, and storefronts. Te... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
