Hardware powder-project powder coating
Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according to the industry’s requirements for powder coatings. We select materials for different industries and make corresponding adjustments to the process to better match the industry’s requirements. We provide customers with high-quality and low-cost products that are easy to use.
| Product name |
Hardware powder |
| Applicable industries |
Electric cabinets, steel components, mechanical equipment, bridges |
| Powder specific gravity |
1.2-1.8ɡ/cm³ |
| Product features |
- Corners and welding points are easy to be powdered.
- The color of thick and thin workpieces is consistent.
- Good hardness.
- Excellent weather and chemical resistance.
|
| Physical properties |
Bending |
ASTM D522 |
Passed-curvature diameter is 5mm |
| GB/T1731 |
Passed-curvature diameter is 2mm |
| Dry adhesion |
ASTM D3359 |
Passed-result is 5B |
| ISO 2409 |
Passed-result is 0 grade |
| GB/T9286 |
Passed-result is 0 grade |
| Cupping |
ISO 1520 |
Passed 5mm-coating has no cracking or shedding |
| GB/T9753 |
Passed 5mm-coating has no cracking or shedding |
| Impact resistance (positive impact) |
ASTM D2794 |
≥50kg.cm |
| GB/T9753 |
50kg.cm |
| Pencil hardness (scratch hardness) |
ASTM D3363 |
≥2H |
| GB/T6739 |
≥2H |
| Storage stability |
12 months (less than 30℃ environment) Re-test after expiration, if it meets the requirements, it can be used at any time |
| Curing process |
200℃/12min, 180℃/15min (workpiece surface temperature) |
| Pretreatment |
All metal substrates need to be degreased and degreased. Iron-based metals are treated with zinc or iron phosphating and aluminum chroming to improve corrosion resistance. |
| Coating |
- Manual or automatic spraying equipment can be used. To ensure the consistency of the coating, automatic spraying equipment is recommended.
- Unsprayed powder can be recycled through an appropriate recycling system.
- Atomizing air pressure ∽0.5 bar .Primary air ∽0.5 bar, spraying voltage 40-90kv.
|
| Damage repair |
Surface treatment: Grinding + air cleaning
Application: Recoating mode,reduce spraying voltage.
|
| Safety Warning |
- When spraying, do not eat, drink or smoke, and avoid inhalation of dust.
- Wear a suitable breathing mask.
- For more information, please ask the salesperson for the material safety data sheet of the specific product for reference.
|
| Disclaimer |
Important note: The information provided in this table cannot be comprehensive and is based on current laws and current knowledge. Anyone who intends to use the product in areas other than those recommended in this table without first obtaining written confirmation from us of the product’s suitability will bear the consequences. It is the user’s unshirkable responsibility to take necessary measures to meet local legal and regulatory requirements. Please continue to read the material safety data sheet and technical parameter sheet of our products when you have time. We try our best to ensure that all the instructions for our products (in or outside the table) are correct, but we cannot fully control the quality or condition of the substrate and the many factors that may affect the use of the product. Therefore, unless we specifically confirm in writing, we do not assume any responsibility for loss of product performance and any other loss or damage caused by the use of the product. All products and technical recommendations we provide are subject to our standard terms and conditions of sale. Please obtain a copy of this document and read it carefully. The content of this table will be supplemented and improved as we accumulate experience and update policies. Before using the product, the user should verify whether the data in this table is the latest. |
Other supplier products
|
|
Hyper-durable powder coatings |
Powder Properties
Appearance
Smooth Matt
Gloss level
20 – 30 gloss units (60°)
Particle size
Suitable for electrostat... |
|
|
Low Temp Cure&Environment friendly Polyester Powder Coatings |
Feature:
-Good adhesion and good mechanical properties
-Good flowing and glossy
-Good chemical resistance and corrosion resistance
-Over 120um ... |
|
|
Rim Powder Coating |
Introduction
Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista... |
|
|
Thin Coating Powder Series |
Introduction
Key Features & Specifications
FeatureSpecification / Benefit
Ultra-Thin Film Formation
Achieves30–50μm film... |
|
|
Conductive Powder Coating |
Product Features:
Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components.
Prevents the occur... |
供应产品
Same products
