Vacuum Pump Oil Additives
Vacuum Pump Oil AdditivesT6014 Vacuum Pump Oil Additive PackageProduct Introduction T6014 is a kind of high-quality ash-free compound additives for mineral oil-based medium and low-end vacuum system lubricant oil , which is made from the lubricant composition, antioxidant compositions, anti-rust and corrosion inhibitor composition as well as other additive .It can be used to blend mechanical vacuum pump oil of all viscosity grades , and it meets the standard of SH 0528-98 and V series of mechanical vacuum pump oil.The blended oil has very good oxidation stability, emulsion breaking performance, anti-wear resistance and corrosion inhibitor properties .Reference dosage ItemReference DosageTypes of petroleum products & dosageMineral oil-based mechanical vacuum pump oil 0.6%-0.8%（m）Base oilAPI I、II、III、IV、V group oil Blend oil is not suggestedOther additivesAnti-foaming agent Demulsifier is not needed in general Oil blending temperatureNot over 65℃SpecificationItemTypical ValueTest MethodAppearanceOrange transparent liquidVisualKinematic Viscosity 40℃ mm2/sReportGB/T265Flash Point,(open)℃186GB/T267Density20℃ g/cm3ReportGB/T1884Nitrogen ,%, m1.35SH/T0224Phosphorus,%, m1.88SH/T0296Packing & Storage This product should be operated as SH/T0164 during the storage,loading and unloading and oil blending. The temperature should not exceed 50℃ for storage,and the temperature should not be over 60 ℃ during the loading and unloading and oil blending.This product is non-flammable, non-explosive and non-corrosive.In terms of safety, environmental protection and application, it is the same as general petroleum products, there is no need for special protection. The product is packed in 200 liter metal drum (Net weight is 180kg/drum).
Other supplier products
|
|
|
lube oil additiveT3133 SF/CD Additive Package For Engine OilProduct IntroductionT3133 general internal combustion engine oil additive package prepa... |
|
|
|
AL Mold Release Emulsifier AdditiveT6011-1 Mold Release Emulsifier Additive Package Product Introduction T6011-1 is used for mold release emulsifie... |
|
|
|
T6004-1 Quenching Oil Additive Package
T6004-1 is formulated with a variety of additives, such as efficient rush cold agent ,antioxidant, bright... |
|
|
|
T5014 Ashless High Pressure Anti-wear Hydraulic OilAdditive PackageProduct Introduction T5014 has excellent high pressure antiwear properties and t... |
|
|
|
soluble cutting oil additiveT6003 Air Compressor Oil Additive PackageProduct IntroductionT6003 is a kind of low ash additive package developed for ... |
供应产品
Same products
