Liquid Silicone rubber for gypsum molds

Liquid Silicone rubber for gypsum applications

  1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .

 

Liquid Silicone rubber for gypsum features

Liquid Silicone rubber is two part silicone with general hardness of 22-50A°after curing with features ------

(1) high tensile & tear strength 

(2)  high duplication times

(3) Low linear shrinkage 

(4)resistance to high-temperature

(5)Low shrinkage and non-deformation

(6)resistance to acid-alkali and expansion

 

Liquid Silicone rubber for gypsum operation instructions

Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

 

Step Two:vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

 

Step Three: Pouring the mixture into the frame with original gypsum mold slowly .

 

Shelf life for Liquid Silicone rubber

10~12months, when stored in a dry & cool place under the room temperature 25.

 

For more information , pls feel free to contact Ms krystal 

office no. :0086-755-89212369

Skype: krystal00795

Email :hyh(at)szrl(dot)net

Mobile: 8618938867601  

Welcome to our website www dot szrl dot net

 



在线询价

至: HONG YE CHEMICAL PLANT CO; LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

  HY Platinum cured silicone rubber for tire mold
HY Platinum cured silicone rubber for tire mold
  Platinum cured silicone rubber
Platinum cured silicone rubber
 rtv liquid moulding silicone rubber( for concrete, pu resin , gypsum casting)
rtv liquid moulding silicone rubber( for concrete, pu resin , gypsum casting)
 Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum molds
 HY Pad Printing Silicon Rubber
HY Pad Printing Silicon Rubber   移印硅橡胶特点: 1)高印刷时代 2)耐磨。 3)良好的印刷效果 4)永久的和持久的 移印硅橡胶操作说明:。第一步:取100克的部分并添加2 g的B部分和混合硅橡胶和固化剂均匀。 第二步:真空抽水 没有例外,这一步需要不到10分钟。 注意:抽真空时间应小于3 -...
供应产品

Same products

三角带
三角带 卖方: Hangzhou Grand Trading Co.,Ltd classical-section V带专业的质量和可靠性!-最佳性能价格比-长寿命-最新的高品质材料-精确制造的计算机驱动的机器-现代生产工艺技术- L = L系统(从1000毫米开始)
rubber hose
rubber hose 卖方: Qingdao J&K Co.,Ltd
rubber buffer 卖方: Qingdao J&K Co.,Ltd
rubber buffer 卖方: Qingdao J&K Co.,Ltd
ordinary flame-retardant conveyor belt with high strength
ordinary flame-retardant conveyor belt with high strength 卖方: YANTAI SUNNY RUBBERCO.,LTD The ordinary flame-retardant conveyor belt has a strong ability of resisting burning