FUXI ® ACID & ALKALI RESISTANT PAINT
Acid resistant paint coatingsare available in a wide range of formulations, suited to different applications. The most common types are epoxy, phenolic, rubber and bitumen. According to the specific environment and condition, the specific alkali & acid resistant paint is chosen to use. Epoxy-based acid & alkali resistant paint is used for internal facilities or concrete surfaces, and for industrial pipeline coating and floors. And for marine application or buried pipeline, bitumen acid and alkali resistant paint are mostly used. Phenolic paint is suited for acid gas and vapor. Rubber modified acid & alkali resistant paint is for acid or alkali water or moisture environment.
Construction Requirements for Acid Alkali Resistant Paint
This acid & alkali resistant coatingis flammable and contains volatile and flammable solvents, so it must be kept away from sparks and open flames. It is strictly forbidden to smoke in the workplace, and effective measures should be taken to prevent the generation of sparks (such as using explosion-proof electrical equipment to keep antistatic, avoid metal impact, etc.).
The construction site should be kept well ventilated as far as possible. In order to eliminate the hidden danger of explosion during use, sufficient ventilation should be ensured to maintain the gas/air ratio not exceeding 10% of the lowest explosion limit. Generally, 200 cubic meters of ventilation per kilogram of solvent are required to maintain the lowest explosion limit of 10% working environment.
Take effective measures to prevent direct contact between the skin and eyes and the alkali anti acid coating(such as using work clothes, gloves, goggles, face shields, and applying protective oil, etc.). If the skin comes into contact with the alkali & acid resistant paint accidentally, please wash thoroughly with water and soap or a suitable industrial cleaner; if your eyes are contaminated, please rinse immediately with water for at least 10 minutes, and seek medical attention immediately.
During construction, it is recommended to wear a face mask to prevent inhalation of alkali resistant coating mist and harmful gases, especially in poorly ventilated environments. Finally, please carefully dispose of the used alkali & acid resistant coating buckets to avoid environmental pollution.
Features of Acid & Alkali Resistant Paint
- High purity
FAQ of Acid and Alkali Resistance Paint
What Is Alkali ResistancePaint
Epoxy, phenolic, chlorinated rubber, coal tar paint and polyurethane all have acid & alkali resistance properties. In an alkali and acid gas environment, we choose polyurethane, chlorinated rubber. Coal tar paint is used for underwater or underground. Epoxy and phenolic will be used for substrate exposed in liquid acid and alkali.
For storage tank of acid, which paint is best for the interior of the tank?For storage tank of acid, which paint is best for the interior of the tank?
FUXI® acid & alkali resistant coatings are, especially for the acid solution liquid and gas storage tank. Our anti-acid paints have good acid, alkali and chemical resistance. They can be resistant to 98% sulfuric acid at 100℃, and good for the storage tanks and other chemical equipment where the coating is to be exposed to acid, alkali and salt, and also used for the reservoirs, water tanks and sewage pools where the coatings need waterproofing.
As a protective coating manufacturer, we have types of industrial paint suppliesfor sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Epoxy Shop Primer (Iron Red) | The epoxy shop primer paintis composed of iron oxide red, epoxy resin, anti-rust pigment, filler, solvent, etc. The paint is fast-drying. After 5-1... |
 |
Etch Primer | Under FUXI® brand, Jinhai Special Coatings,paints manufacturer, has developed our own formulation system, including epoxy, phenolic, alkyd, acr... |
 |
Epoxy Tie Coat | Epoxy tie coat painthas very good adhesion to stainless steel and non-ferrous metal substrates. It has excellent flexibility and shielding properti... |
 |
General-Purpose Chlorinated Rubber Anticorrosive Coating (Self-Priming Paint for Ships) | Under FUXI® brand, Jinhai Special paints and coatingshave developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, sili... |
 |
Chlorosulfonation Polyethylene Anticorrosive Finish | Chlorosulfonationpolyethylene anticorrosive paint is formulated with chlorosulfonated polyethylene resin, anti-corrosive and antirust pigments, fil... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
