.

Super leveling powder coating

WA:+86 132 6275 2056

WEB: std-coatings.com

Introduction

The Super leveling powder coating series features an exclusive formula that provides excellent leveling, comparable to paint, while effectively solving the problem of dripping (sagging).

Application

The Super leveling powder coating series can be widely used in products that require high leveling properties in coatings, such as indoor and outdoor furniture, doors and windows, and home appliances.

Features

ItemSpecification
Chemical Type Epoxy/Polyester or Pure Polyester Type
Appearance Flat
Curing Condition (Workpiece Temperature) 200℃ / 10min; improper curing may cause loss of color, gloss, and coating performance
Gloss Depends on specific product
Storage Condition Sealed and stored in a dry, cool place below 30℃
Shelf Life 6 months (<30℃), 12 months (<25℃)
Packaging Specification 25kg/carton

Technical indicators

Note: Substrate and pretreatment: Mechanical performance testing used 0.6mm thick degreased cold-rolled steel sheet; corrosion aging resistance testing used 0.6mm thick zinc-based phosphated steel sheet or chromated aluminum sheet.

• Film thickness: 60-80μm
• Curing conditions: 200℃/10min (workpiece temperature)

ItemIndexTest Standard
Bending Passed, curvature diameter 6mm ASTM D522
Passed, curvature diameter 4mm GB/T 1731
Dry Adhesion Passed, result 5B ASTM D3359
Passed, result Grade 0 ISO 2409
Cupping Test Passed, 6mm, no cracking/peeling ISO1520
Passed, 6mm, no cracking/peeling GB/T 9753
Impact Resistance (Direct Impact) ≥50kg·cm ASTM D2794
≥50kg·cm GB/T 1732
Pencil Hardness ≥H ASTM D3363
≥H GB/T 6739
Chemical Resistance Good (tested with general acids, alkalis, oils at room temperature) /
Water Mist Resistance Passed, 1000h, no blistering or loss of gloss ASTM D1735
Water Immersion Resistance Passed, 240h, no blistering or loss of gloss ASTM D870
Neutral Salt Spray Passed, 500h, no blistering or peeling ISO 9227

Construction Reference

The Super leveling powder coating series can be used with manual or automatic spraying equipment, provided a clean air source is used.

Atomizing air pressure: ~0.7 bar
Primary air pressure: ~0.7 bar
Recommended voltage: 40~90kV
Safety warning: When using the spraying equipment, ensure proper ventilation and dust collection. Workers must take appropriate protective measures and wear suitable protective equipment. For more detailed information, please refer to the safety information sheet for the corresponding product.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Outdoor quality-warranty weather-resistant wooden transfer powder coating
Outdoor quality-warranty weather-resistant wooden transfer powder coating Introduction Standard transfer water-grain primer uses imported weather-resistant polyurethane PU system, which has the advantages of high lev...
Durable polyester powder coatings  MT-A1000- YG001V- Red color
Durable polyester powder coatings MT-A1000- YG001V- Red color WA:+86 132 6275 2056 WEB: std-coatings.com Product Description MT Autobody powder coating isa series of durable polyester powder coatings desi...
Powder coating for automobile springs
Powder coating for automobile springs Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product description Powder coating for automobile springs is outdoor pure polyester pow...
Taro white Powder Coatings
Taro white Powder Coatings Introduction No. MT-70285 Color Taro white Surface Fine sand texture matte System Epoxy/polyester blend Scope of app...
Soft Coral Gold powder coating
Soft Coral Gold powder coating Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,...
供应产品

Same products

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...