Polyurethane primer STD-927
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good foundation for the application of waterproof coatings. At the same time, the primer can also be more compatible with the waterproof coating and enhance the overall performance of the waterproof layer.
One-component primers usually contain special resin ingredients that can penetrate into the tiny pores of the base material to form a mechanical anchoring effect, thereby greatly enhancing the bonding strength between the waterproof coating and the base.
Typical performance
| Viscosity (25℃) pa.s | 2~9 |
| NCO | 8~15 |
| Coating impermeability | 04Mpa,2min |
| Bond tensile strength | ≥2.3 |
| Heat resistance | 100℃.5h coating |
| Corrosion resistance (48h) | 40% sulfuric acid 25% hydrochloric acid 40% sodium hydroxide |
Features
Improve waterproof layer performance
Enhance the adhesion of the base
Application
Using a one-component primer before applying waterproof coatings can make the waterproof coating more evenly distributed on the surface of the base layer, forming a waterproof layer with consistent thickness and continuity, thus improving the waterproof effect and durability of the waterproof layer. For example, in roof waterproofing projects, after using a one-component primer to treat the base layer, the waterproof layer’s anti-seepage and anti-aging properties can be significantly improved.
This strong bond ensures that the waterproof layer is not easy to fall off when subjected to external forces (such as slight deformation of the base layer, stress caused by temperature changes, etc.), maintaining the integrity of the waterproof system. For example, after applying a single-component primer on a concrete base layer, the resin in the primer will fill the pores on the concrete surface, allowing the waterproof coating to better adhere to the base layer, avoiding problems such as hollowing and peeling in the later stage.
在线联系供应商
Other supplier products
 |
Sand grain MT-05960858 | Introduction No. MT-059/60858 Color Red ink (brown) Surface Sand grain System Polyester Scope of application Used f... |
|
|
Light Yellow Sand Texture Powder Coating | Product specification Type Epoxy Powder Coating; Polyester Powder Coating;Epoxy-Polyester Powder Coating Color RAL&Pantone color ... |
 |
Organic modified silicone acrylate Rad 2010 | DESCRIPTION Organic modified silicone acrylate Rad 2010 improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, alu... |
 |
High temperature powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com High temperature powder coating products for interior and exterior high temp applicatio... |
 |
High Glossy Blue Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction High gloss powder coating is a kind of excellent performance coating, with... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
