Powder coating primer containing zinc MT-PZ ALZ44TH
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Overview
MT-PZ ALZ44TH is a high-performance zinc-rich epoxy powder coating primer engineered to deliver superior corrosion protection for mild steel structures. This duplex system combines the benefits ofcathodic protectionandbarrier effect, ensuring both long-term corrosion resistance and structural integrity. The formulation incorporates a highly conductive epoxy zinc-rich base that enhances cathodic protection, while built-in anticorrosive agents improve scratch resistance and maintain protection even in case of minor surface damage. MT-PZ ALZ44TH is designed to be over-coated with compatible industrial topcoats, enabling its use in multi-layer protective coating systems for harsh industrial environments.
Powder Properties
| Property | Specification | Details |
|---|---|---|
| Chemical Type | Thermosetting Epoxy | Epoxy resin-based, zinc-rich formulation |
| Appearance | Smooth | Fine, uniform powder suitable for electrostatic application |
| Color | Grey | Approx. RAL 7012 |
| Recommended Film Thickness | 70–120 µm | Ensures optimal corrosion protection |
| Density | 2.9 ± 0.03 g/cm³ | Provides a consistent coating weight per unit area |
| Application | Electrostatic spraying | Corona method recommended; tribo application not advised |
| Storage | Dry, cool (≤30°C) | Avoid moisture and direct sunlight; maintain packaging integrity |
| Shelf Life | ≥12 months | When stored under recommended conditions |
Surface Pretreatment Guidelines
Proper substrate preparation is critical for optimal adhesion and corrosion resistance. Pretreatment recommendations for MT-PZ ALZ44TH include:
| Substrate | Mechanical Pretreatment | Chemical Pretreatment |
|---|---|---|
| Mild Steel | Grit Blasting Sa 2.5 per ISO 8501-1. Rz 35–60 µm, Ra 6–12 µm | Degreasing & phosphating or equivalent; surface must be dry and free of contaminants |
| Cast Steel | Not recommended | Not recommended |
| Electro Zinc Steel | Not recommended | Not recommended |
| Hot-Dip Galvanized Steel | Not recommended | Not recommended |
| Zinc-Sprayed (Gas Flame/Electrical Deposition) | Not recommended | Not recommended |
Note:Surface preparation is mandatory to achieve full cathodic protection and coating performance. Avoid applying MT-PZ ALZ44TH on substrates outside these recommendations.
Application Guidelines
MT-PZ ALZ44TH is optimized forcorona electrostatic powder spraying. Tribo application is not recommended due to potential adhesion issues.
Recommended Equipment Settings:
Fluidizing Air Pressure: Start at 1.5 kg/cm², then reduce to 1.0 kg/cm²
Transport Air Pressure: 0.5–0.8 kg/cm²
Voltage: 65–70 kV
Curing Guidelines:
Ensure the primer is fully cured or at least gelled before topcoat application.
Object temperature: 110–180°C
Use a convection oven; optional infra-red heaters are acceptable.
Air temperature in the oven must not exceed 180°C.
Recommended Film Thickness: 70–120 µm — critical for optimal barrier and cathodic protection.
Recycling Notes:
Conduct trials with recycling equipment before production.
Maintain a minimum of 70% new powder in the recycling mix.
Clean gun nozzles every 30 minutes to avoid clogging and ensure consistent coverage.
在线联系供应商
Other supplier products
 |
Powder coating primer containing zinc MT-PZ ALZ44TH | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enha... |
 |
MT-A2201 Powder coatings for Automotive trim parts | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be used for pillars and appliqué... |
 |
Architectural Curtain Walling Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Product Description： Electrostatic Spray Powder Coating Paint for Architec... |
 |
Office Furniture Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Features Superior Charge Retention and Leveling: Offers higher gloss, full and bright appea... |
 |
Weather-resistant powder coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product description: This series of products uses saturated polyester resin and acrylic... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
