Standard Building Materials Powder Coating
WA：+86 132 6275 2056
WEB: std-coatings.com
Detailed Description
Polyester resin and TGIC curing agent as the main raw materials.
Coating characteristics:
Good adhesion, excellent mechanical properties, tough coating film.
Smooth and smooth film
Good Outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for various outdoor products such as:outdoor lighting, beach chair, solar water heater,
outdoor air conditioning unit, aluminum curtain wall,door and window frame, ceiling, highway guardrail,fence, sports facilities, communication equipment,etc
Application parameters:
Curing time
200°Cx10–15 mins
Recommended filmthickness:
60-80 um
Spraying method:
high voltage electrostatic sprayin60-80KV
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance. commitment of the product application.
The results vary with environmental factors and other conditions.
在线联系供应商
Other supplier products
 |
Anodized Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview It is suitable for anodic oxidation effect for product appearance, as well as envi... |
 |
Epoxy polyester powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Product characteristics The coating has good decor... |
 |
Powder coating primer containing zinc MT-PZ ALZ55V | Product Description MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of blasted mild steel... |
 |
High-temperature resistant powder coatings | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction STD high-temperature resistant powder series products are safe and environmentally fri... |
|
|
Electrical insulation powder | Product description This series of products is made of epoxy resin and curing agent as the main raw materials. Features: —Good adhesion, g... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
