High durability powder coatings MT-800
WA:+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-800 is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 powders are available in a wide range of colours and gloss levels and can be custom matched to the user' s requirements.
Powder properties
| Typical value | |
| Chemical Type | Polyester TGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 12 months |
| Stoving schedule (object temperature) |
15 minutes at 190°C 10 minutes at 200°C 8 minutes at 210°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Pre-treatment | Chromate conversion |
| Substrate | Aluminium |
|
Stoving Schedule (object temperature) |
10 minutes at 200°C |
| Film Thickness | 60 microns |
Mechanical Tests
|
Adhesion (2mm Crosshatch) |
ISO2409 | Gt 0 |
| Erichsen cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
在线联系供应商
Other supplier products
| Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R | WA:+86 132 6275 2056 WEB: std-coatings.com Product Description The visual effect achieved from the final headlamp reflector is of the utmost i... | |
| Powder coating for automobile springs | WA:+86 132 6275 2056 WEB: std-coatings.com Product description Powder coating for automobile springs is outdoor pure polyester powder coating ... | |
| Frame & chassis powder coatings MT-A400 series | Product Overview: Weather-resistant pure polyester powder coatings designed for frame and chassis parts Coating characteristics: – High ... | |
| Wood grain powder coating | Product introduction Conventional series wood grain – suitable for standard decorative purposes; E series high-definition wood grain &ndash... | |
| Powder coating series for vehicle compartment | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction With the development of environmental protection and energy conservation, ... |
Same products
| Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... | |
| Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... | |
| Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... | |
| Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... | |
| Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |













