.

Epoxy Anti-Corrosion Powder Coating for Pipeline Internal Coating

WA:+86 132 6275 2056

WEB: std-coatings.com

Product Introduction:

This product is formulated using special epoxy resin and functional curing agents. It features high reactivity, strong adhesion, high cross-link density, and excellent resistance to chemicals, solvents, cathodic disbondment, as well as superior flexibility and impact resistance.

Product Usage:

Municipal, water supply, drainage, sewage, circulating water, chemical, and power plant pipelines.

Product Features:

Excellent adhesion to the substrate.

Good leveling and high gloss on the coating surface.

Strong resistance to permeation and corrosion.

High surface hardness and dense coating.

Superior high-temperature cathodic disbondment resistance.

Good mechanical properties and extremely strong flexibility.

Low melting temperature, high reactivity, and high curing completion rate.

Powder Performance:

PropertySpecificationNotes
Adhesion Excellent
Leveling Good, high gloss
Corrosion Resistance Superior
Surface Hardness High
Cathodic Disbondment Resistance Excellent at high temperatures
Flexibility Extremely strong
Temperature Resistance Good performance in high and low temperatures

Curing Conditions:

PropertySpecificationNotes
Temperature 200-230°C for 3-1.5 minutes (medium-frequency heating) Deviations may affect performance

Application Parameters:

ParameterSpecificationNotes
Applicable Equipment Frictional charging spray, corona electrostatic spray, dip coating, roll coating
Film Thickness 150-450um Adjustable according to workpiece requirements

Health and Safety:

PropertySpecificationNotes
Toxicity Non-toxic
Flammability Non-flammable
Regulation GB15607-1995 Coating operation safety regulations

Precautions:

ItemSpecificationNotes
Outdoor Use Not recommended May cause fading and chalking
Surface Preparation Oil-free, water-free, surface treatment to Sa21/2 level (GB/T8923), anchor pattern depth 40-100um, clean surface from dust and abrasives
Preheating Temperature controlled between 180-230°C
Storage Ventilated, dry, below 30°C, away from heat sources, corrosive chemicals, and solvents, avoid strong light, maximum stack height 5 layers, avoid long-term pressure, keep packaging sealed
Curing Temperature Preheat steel pipe surface to above 200°C for better curing completion rate

Compliance Standards:

MT SY/T 0442-97 “Technical Standard for Internal Coating of Steel Pipelines with Fusion-Bonded Epoxy Powder”


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Organic modified silicone acrylate Rad 2010
Organic modified silicone acrylate Rad 2010 DESCRIPTION Organic modified silicone acrylate Rad 2010 improves adhesion and flexibility of solventborne coatings on steel, galvanized steel, alu...
Flat metal MT-049/94884
Flat metal MT-049/94884 Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com No. MT-049/94884 Color Canyue (silver) Surface Flat metal ...
Powder coating for pipeline anticorrosion
Powder coating for pipeline anticorrosion Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com The service life of the pipeline depends largely on the anti-corrosion method of the st...
Steel pipeline powder coating
Steel pipeline powder coating Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”...
Metallic flat high gloss MT-049/98010
Metallic flat high gloss MT-049/98010 Introduction No. MT-049/98010 Color Metallic color Surface Metallic flat high gloss System Polyester Scope of ap...
供应产品

Same products

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...