Powder coating for elevators
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product description
Coating characteristics:
—Excellent leveling
—High mechanical properties
—Good salt spray resistance
Application:Suitable for elevator floor doors, door frames, car doors, car roofs, car walls and outsourced parts.
Application parameters:
Curing time: 180℃~200℃×10–15 minutes
Spraying method: High-voltage electrostatic spraying 60-80 KV
Recommended film thickness: 60-150 um
Coating performance:
| Item | Instrument | Judgment standard | Test standard |
| Adhesion | Single-edged knife, tape | Level 0 | GB/T9286 |
| Impact resistance | Impact tester | 50 kg.cm passed | GB/T 1732 |
| Coating hardness | Hardness tester | ≥1H | GB/T6739 |
| Solvent resistance | Anhydrous ethanol, rag | After 20 wipes, no scratches or discoloration | – |
| Alkali resistance | 0.1N NaOH, beaker | ≥48h, no blistering, shedding, rust, or spots on the coating | GB/T9274 |
| Water resistance | Beaker, distilled water | ≥240h, no blistering, shedding, rust, or spots on the coating | GB/T1733 |
| Acid resistance | 0.1N sulfuric acid, beaker | ≥48h, no blistering, shedding, rust, or spots on the coating | GB/T9274 |
| Neutral salt spray test | Salt spray test chamber | ≥240h, rust and blister <2MM | GB/T1771 |
| Flexibility | Bending tester | No cracks or shedding around the axis 2mm | GB/T1731 |
| Artificial aging resistance | Aging test chamber | ≥480h, gloss loss <1 level, discoloration <1 level, others are 0 level | Method 1 in GB/T1865 |
在线联系供应商
Other supplier products
 |
Fluorine rubber compound | CategoryDetails Composition –Base Polymer: Fluoroelastomer (FKM) copolymer –Reinforcing Agents: Carbon black (30&nda... |
 |
Metal powder coating | Introduction Based on the users’ pursuit of metal texture and effect, the market demand for metal powder is increasing. At present, the mark... |
 |
Pure epoxy primer powder MT Plus -AL117N | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description Pure epoxy primer powder MT Plus -AL117N is a powder primer protect... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used for pillars and appliqués, roof racks, gril... |
 |
Modified acrylic copolymer emulsion STD-20135 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction STD 20135 is a modified acrylic copolymer emulsion with excellent substrat... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
