.

EP hybrid powder coating

Getaquote

whats/app:+86 132 6275 2056

WEB: std-coatings.com

Product description

It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the produced coating has excellent leveling, decorative, mechanical properties and strong corrosion resistance.

Application areas:

Widely used in the coating of various indoor metal products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.

3. Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Spraying area 8-12 m2/Kg, film thickness 70μm (100% powder usage rate)
Adhesion GB/T 9286 Grade 0
Impact GB/T 1732 50cm
Cupping test GB/T 9753 ≥ 6 mm
Bending test GB/T 6742 ≤ 3 mm
Pencil hardness GB/ 6739 ≥ H
Salt spray test GB/T 1771 1000 h passed
Moisture and heat resistance GB/T 1740 1000 h passed

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: Electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes

Hygene & Safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety & protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time. Ash layer and powder particle deposition should be avoided on the surface and dead corners. Tiny organic particles will be ignited and explode under static electricity. All equipment must be grounded to prevent static electricity.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Medical device friction powder
Medical device friction powder Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Accurate selection of powder has always been a problem for the powder industry. To solv...
Powder Coating Manufacturer
Powder Coating Manufacturer Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com As a leading powder coating manufacturer in China, we can provide you with high-qual...
Polyester/TGIC powder coating series
Polyester/TGIC powder coating series Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Made of polyester resin and TGIC curing agent as the main raw materials. Features: &mda...
Villa Elevator Powder Coating
Villa Elevator Powder Coating Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing ...
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes
Epoxy Anti-Corrosion Powder Coating for Firefighting Pipes Product Introduction:This product is formulated using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and advanced curing agents, d...
供应产品

Same products

Metallic flat high gloss  MT-049/98010
Metallic flat high gloss MT-049/98010 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
Pure epoxy powder coating
Pure epoxy powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
Epoxy polyester powder coating
Epoxy polyester powder coating 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
Pure polyester weather-resistant powder coating Factory Supplier
Pure polyester weather-resistant powder coating Factory Supplier 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
Metallic flat semi-gloss Powder Coating  MT-049/97003
Metallic flat semi-gloss Powder Coating MT-049/97003 卖方: Standard International Group (HK) Limited Getaquote whats/app:+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...