Epoxy-polyester powder coating MT-APA EL286A/MT- EL286A
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-APA is an epoxy-polyester powder coating primer especially designed for direct application on substrates that are sensitive to out-gassing, such as Hot Dip Galvanized steel, Metal spraying, Zamak, Cast steel, Aluminium, brass etc. MT-APA offers excellent flow, chemical and salt spray resistance, and resistance to mechanical damage. MT-APA is suitable for use as a primer for a variety of liquid topcoats, however it is recommended that pre-qualification tests for intercoat adhesion be carried out prior to use
Powder Properties
| Appearance | Smooth |
| Chemical type | Epoxy-Polyester |
| Color | Grey |
| Recommended Film Thickness (µm) | 50 – 80 µm |
| Density (g/cm3) | 1.68 ± 0.03 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 25°C) conditions |
| Shelf life | 24 months below 25ºC |
Pretreatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT-APA. The pre-treatment should be used in accordance with the supplier’s recommendations.
a) Aluminium Multistage chrome chromate or chrome phosphate
b) Galvanised Steel Multistage zinc phosphate or chromate
c) Steel Multistage zinc or iron phosphate
Application
MT-APA is suitable for corona electrostatic spraying. Tribo application is not recommended.
| Recommended film thickness | 50-80 µm, good protection is linked with the recommended film thickness. |
| Recycling | Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used. |
Note: Failure to comply with the recommended curing conditions may affect the adhesion of the topcoat and cause degradation of the system performance properties. Parts coated with MT-APA should not be handled if possible. If handling is unavoidable, clean lint-free gloves must be worn.
在线联系供应商
Other supplier products
 |
Red Wrinkle Color Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Texture Wrinkle Type Epoxy resin series Main Material Epoxy res... |
 |
Household electrical appliances powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Characteristics of powder coatings ''It does not contain toxic, solvent free, or volati... |
 |
Flat high gloss MT-049/7B666 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/7B666 Color White Surface Flat high glos... |
 |
Flat matte MT-039/23679 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-039/23679 Color Yellow Surface Flat matte System W... |
 |
Functional Material Powder Coatings | 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coatings fall short, ... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
