Polyester resin based thermo-setting powder coatings MT-300 AM
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specifications MT-800 gives significantly improved gloss retention and resistance to colour change. MT-800 AM powders are available in a wide range of colours and gloss levels and can be custom matched to the user’s requirements.MT-800 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder Properties
| Chemical Type | PolyesterTGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.2-1.7 g/cm³ depending on colour and effect |
| Storage | Dry cool conditions below 25°C |
| Shelf Life | 12 months |
| Stoving Conditions
(at object temperature) |
15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Mechanical Tests
| Adhesion (2mm Crosshatch) | ISO2409 | Gt 0 |
| Erichsen Cupping | ISO1520 | Depends on shade |
| Hardness (4000gms) | ISO 1518 | Pass – no penetration to substrate |
| Impact | BS6496 | Depends on shade |
| Flexibility (Conical Mandrel) | ISO6860 | Depends on shade |
Pre-treatment
For maximum protection it is essential to pretreat components for exterior use prior to the application of MT-800. Aluminium components should receive a full multi-stage chromate conversion coating to clean and condition the substrate. Detailed advice should be sought from the pretreatment supplier. Galvanised steel also requires multi-stage pretreatment using either zinc phosphate or chromate conversion. Degassing of galvanised steel prior to powder application is considered mandatory – follow the procedural advice of the pretreatment supplier. MT-800 products may also be used on other substrates (eg. mild steel fabrications) for internal applications; nevertheless zinc phosphate pretreatment is regarded as essential.
Application
MT-800 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Product Description
MT-300 AM is a series of polyester resin based thermo-setting powder coatings formulated using TGIC. The pigments used in the MT-300 series restrict the field of application of this powder coatings class to interior uses. MT-300 is designed for interior decoration such as, metal furniture, shop fittings, shelves, light fittings. MT-300 AM is a high-quality powder coating designed to meet decorative and functional demands of your specifications. Test results have proven reduction of bacteria and mold up to 99.9%.
Powder Properties
| Chemical Type | PolyesterTGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.2-1.95 g/cm³ depending on colour and effect |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf Life | 12 months |
| Stoving Conditions
(at object temperature) |
12 to 24 minutes at 180°C
8 to 16 minutes at 200°C 4 to 10 minutes at 210°C |
Mechanical Tests
| Smooth | Fine Structure | Coarse Texture | ||
| Flexibility (Cylindrical Mandrel) | ISO 6860 | Pass 6 mm | Pass 5 mm | Pass 5 mm |
| Adhesion | ISO 2409 (2mm Crosshatch) | Gt 0 | Gt 0 | Gt 0 |
| Erichsen Cupping | ISO 1520 | Pass 6 mm | Pass 6 mm | Pass 6 mm |
| Impact | ISO 6272 (1993) | 50kgcm | 50kgcm | 50kgcm |
Pre-treatment
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating, chrome free pre-treatment or flash anodizing for certain applications. Galvanised steel may require zinc or chromate conversion or sweep blasting. Detailed advice should be sought from the pre-treatment supplier.
Application
MT-300 powder coatings can be applied by corona electrostatic or tribostatic equipment. However the aspect obtained by tribo-static equipment may vary when compared to electrostatic application and/or our colour card. In all application processes the aspect obtained is subject to variation, depending on the method of application (type of gun, nozzle, etc) and the shape/type of component. We recommend that the actual application parameters are adapted and adjusted depending on the type of component and with each powder batch in order to give a finish in accordance with our colour card. The following procedure is given as a guideline when using these finishes. We recommend the use of flat jet spray nozzles. To ensure powder homogeneity, the complete content of the boxes should be emptied completely into the feed hopper. For manual application it is essential to ensure that an even film thickness is applied and in all Instances sinusoidal gun movements should be avoided.
在线联系供应商
Other supplier products
 |
Black powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction MT-MY1831 New polished black gold cracks MT-HJ0024 Black highligh... |
 |
Flat matte MT-049/7B556 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/7B556 Color Gray Surface Flat matte System Pol... |
 |
Soft Starry Grey powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Features With a special skin feel formula, the surface of the coating after... |
 |
Powder coating for construction machinery | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Engineering machinery is an important part of the equipment industry. Engineering machi... |
 |
Hammertone Powder Coating | Introduction We are a leading powder coating manufacturer specializing in Hammertone Powder Coating with full customization services. Based in Chi... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
