Architectural aluminum powder coating MT-D34

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

Product Description

MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.

Powder Properties

Chemical Type	Polyester
Appearance	Smooth
Particle Size	Suitable for electrostatic spray
Specific Gravity	1.3 – 1.7 g/cm³
Gloss	45 – 55% (depending on color)
Storage	Dry, cool conditions (open boxes must be resealed)
Shelf Life	12 months below 25°C peak temperature 6 months below 30°C peak temperature
Stoving Conditions (at object temperature)	10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties.

Mechanical Tests

Adhesion	GB/T 9286	Pass Gt0
Erichsen cupping	GB/T 9753	Pass, 5 mm no crack or detachment of film
Impact resistance	GB/T 20624.2	Pass, 50 InP Reverse, deformation no crack
Bend Test	GB/T 6742	Pass, 3 mm no crack

Pre-treatment

For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier’s recommendation.

Substrate

Aluminum – Multi-stage chrome chromate or chrome phosphate Galvanised.

Steel – Multi-stage zinc phosphate or chromate.

Steel – Multi-stage zinc or iron phosphate.

Application

MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.

Other supplier products

	Architectural Powder Coatings – Factory Direct from China	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Our products are available in: Customized Colors: RAL, Pantone, or fully tailored shade...
	Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes	Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive mat...
		Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Key Features & Specifications FeatureSpecification / Benefit Skin-Li...
	Polyester based powder coating MT-JA220G White	Product Description MT-JA220G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ...
	Flat high gloss MT-049/7B666	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/7B666 Color White Surface Flat high glos...

供应产品

Same products

	Metallic flat high gloss MT-049/98010	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	卖方: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...