BONDING Metal Powder Coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
This series of products uses advanced Bonding technology equipment to produce surface metal powder with brighter optical effects, good metallic luster, no black spots, yin and yang colors, fingerprints and other defects in the coating, high powder application rate, and high utilization rate of recycled powder.
Product Features
The metal pigment is tightly combined with the base powder, and there will be no clogging of the muzzle during spraying;
The adhesion between the metal powder and the substrate is strong, and it is not easy to fall off during painting:
The recycled powder spraying effect is compatible with the new powder;
The coated metal pigment is not easy to fall off, oxidize, and has no fingerprint defects.
Special Effects
Various wrinkles, metal, pearlescent effects and mixed colors, etc.
Application Fields
Metallic powder coating refers to various powder coatings containing metal pigments (such as: copper gold powder, silver aluminum powder, pearlescent pigments, etc.). Due to its gorgeous decorative effect of the coating, it is very suitable for spraying fitness equipment, furniture, automobiles, etc.
Transportation Packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture, heat, and chemical substances.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm’ (depending on the formulation and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, and greater than 100 microns powder <0.5%. |
| Storage stability | Bonding metal powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stored stably for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with light below 40% (60°), the storage temperature should be below 30°C. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. | ||
| Curing conditions | 200℃/10 minutes is recommended, and it can also be designed according to user needs. | |
在线联系供应商
Other supplier products
 |
Sand grain matte MT-039/68004 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-039/68004 Color Brown Surface Sand grain matte System... |
 |
Polyvinyl acetate powder coating | Introduction Brief description It is made of German and multi-head trees and chemicals such as TGIC or HAA. Features Excellent mechanical pro... |
 |
PVDF super weather-resistant fluorocarbon powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com 30-year warranty for PVDF super weather-resistant fluorocarbon powder Introduction PVDF... |
 |
EP-01W single-layer FBE powder coating for pipe exterior | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product details Applicable to the single-layer structure of steel pipe external coating... |
 |
Benzyl Chloride CAS100-44-7 | Properties and Applications 1.1 Molecular formula, Molecular weight, Structural formula and CAS No. Molecular formula: C7H7Cl Molecular weight: ... |
Same products
 |
Flat matte POWDER COATING MT-049/14900 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/14900 Color White S... |
 |
Sand grain MT-059/60858 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-059/60858 Color Red ink (... |
 |
Sand grain metal POWDER COATING MT-049/77578 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/77578 Color Xuanyou ... |
 |
Flat metal POWDER COATING MT-049/94947 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/94947 Color Luanhua ... |
 |
Flat Metallic Powder Coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Brand： STD Color R... |
