Decorative powder coating series
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Introduction
Product Overview
This series of products includes epoxy, hybrid, polyester, polyurethane and other systems, designed to meet the needs of various complex indoor and outdoor environments.
Product Features
Colorful or simple style, to meet diverse aesthetic needs.
Excellent substrate defect hiding ability.
Uniform and stable pattern shape, with excellent pattern reproducibility.
Application areas
Furniture products
Shelf system
Iron hardware
Fitness equipment
Lighting products
Security doors
Safes
Industrial equipment
Product series
Surface effect classification (both suitable for indoor and outdoor environments):
Sand effect
Wrinkle effect
Point diffusion effect
Hammer effect
Shrinkage effect
Metallic appearance effect
Technical parameters
Basic properties of powder:
Specific gravity: 1.1~1.8g/cm³
Coating properties
| Mechanical properties | Pencil hardness | GB/T6739-1996 | ≥H |
| Adhesion | GB/T9286-1998 | Grade 0 | |
| Bending | GB6742-86 | Φ3mm | |
| Impact | GB/T1732-93 | 50kg.cm | |
| Cupping | GB 9753-88 | >6mm | |
| Corrosion resistance | Salt spray resistance | GB/T1771-91 | No change in coating film after 500-1000 hours, unilateral corrosion at the cross section <2mm |
| Moisture and heat resistance | GB/T1740-79 | >1000 hours slight gloss loss, ≤Grade 1 | |
| Weather resistance | Depends on the type of powder coating | ||
| Note: The above parameters are laboratory data for reference only. The actual indicators are related to factors such as customer environment, equipment, substrate, pretreatment, and spraying process. |
|||
Pretreatment: Phosphating or chromizing treatment is required.
Coating method:
Suitable for corona electrostatic coating.
Artistic effect may vary depending on the process.
Baking conditions: Determined according to the type of product curing system (no specific temperature/time is provided).
Packaging
Carton packaging, lined with polyethylene plastic bags.
Net weight: 20kg/box.
Storage conditions
Environmental requirements: temperature ≤30℃, dry and ventilated, avoid direct sunlight.
Shelf life: 6 months (when the above conditions are met).
Safety and health tips
The raw materials are non-toxic, and no toxic gas is released during baking.
Operation protection:
A dust mask must be worn (avoid inhaling dust).
Reduce long-term skin contact, and the attached coating can be washed with soap.
在线联系供应商
Other supplier products
 |
High-temperature resistant powder coatings | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction STD high-temperature resistant powder series products are safe and environmentally fri... |
 |
Polyester based powder coating MT-MA010G White | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-MA010G is a polyester based powder coating, formulated without TGIC and is d... |
 |
Pure polyester transparent powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description This series of products is made of polyester resin and hardener, an... |
 |
Water-dispersible isocyanate curing agent STD 268 | Product Description STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyure... |
 |
Pure epoxy primer powder MT Plus -AL117N | Product Description Pure epoxy primer powder MT Plus -AL117N is a powder primer protective barrier designed to give enhanced corrosion protection ... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
