Polyurethane primer
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product Description
The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good foundation for the application of waterproof coatings. At the same time, the primer can also be more compatible with the waterproof coating and enhance the overall performance of the waterproof layer.
One-component primers usually contain special resin ingredients that can penetrate into the tiny pores of the base material to form a mechanical anchoring effect, thereby greatly enhancing the bonding strength between the waterproof coating and the base.
Typical performance
| Viscosity (25℃) pa.s | 2~9 |
| NCO | 8~15 |
| Coating impermeability | 04Mpa,2min |
| Bond tensile strength | ≥2.3 |
| Heat resistance | 100℃.5h coating |
| Corrosion resistance (48h) | 40% sulfuric acid 25% hydrochloric acid 40% sodium hydroxide |
Features
Improve waterproof layer performance
Enhance the adhesion of the base
Application
Using a one-component primer before applying waterproof coatings can make the waterproof coating more evenly distributed on the surface of the base layer, forming a waterproof layer with consistent thickness and continuity, thus improving the waterproof effect and durability of the waterproof layer. For example, in roof waterproofing projects, after using a one-component primer to treat the base layer, the waterproof layer’s anti-seepage and anti-aging properties can be significantly improved.
This strong bond ensures that the waterproof layer is not easy to fall off when subjected to external forces (such as slight deformation of the base layer, stress caused by temperature changes, etc.), maintaining the integrity of the waterproof system. For example, after applying a single-component primer on a concrete base layer, the resin in the primer will fill the pores on the concrete surface, allowing the waterproof coating to better adhere to the base layer, avoiding problems such as hollowing and peeling in the later stage.
在线联系供应商
Other supplier products
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces MT R4-ES HJ601R | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the co... |
 |
Automotive original powder coatings | Introduction 1. Market Shift: Driven by Environmental Compliance Under China’s “Dual Carbon” policy and global sustainability t... |
 |
Polyester based powder coating MT-OA110G | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
Dicyandiamide CASAMID DMPF | Description CASAMID DMPF is agrade of dicyandiamide,ground to a very fine particle size, for use in epoxy resin-based powder coatings and contains... |
 |
Flat metal MT-049/92390 | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com No. MT-049/92390 Color Frost (silver) Surface Flat metal System Polyester S... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
