Smart Laser Scanner
Smart Laser Scanner
Hashu serie is a highly integrated galvanometer scanning system. The galvanometer control card is perfectly integrated into the inside of the scan head, and the Ethernet connection to the computer can be used for marking. The galvanometer driver board and laser control card are integrated into one system, and the reliability is very high. Special optimization realizes synchronous real-time control of galvanometer and laser, and supports remote control within LAN. The built-in control card adopts dual-core ARM architecture with powerful performance. Scanworld laser machining software requires no driver installation and is easy to use.
Key Features Of Smart Laser Scanner
Product composition: Laser processing head; Laser marking software
Scanner: Adopt dual-core ARM architecture and dominant Frequency 800MHz, equipping with 512MB DDR3 memory and onboard 256 Mbit
ScanWorld: High-precision BOX correction function with calibration precision up to 6μm and support 3D focus calibration
Easy to use without the extra installed control card
Easy to make wire with good reliability
Remotely control in LAN
Support SD card storage and work offline marking.
Specifications Of Smart Galvo Scanner Laser
|
14mm |
||
|
10mm |
||
|
Input Beam Aperture (mm) |
10 |
14 |
|
Beam Displacement (mm) |
||
|
Tracking Error (ms) |
||
|
Repeatability (µrad) |
＜2 |
＜2 |
|
Offset Drift (µrad/K) |
＜15 |
＜15 |
|
Gain Drift (ppm/K) |
＜80 |
＜80 |
|
Long-Term Drift Over 8 hours (mrad) |
＜0.3 |
＜0.3 |
|
1% Of Full Scale (ms) |
||
|
10% Of Full Scale (ms) |
||
|
Positioning Speed (m/s) |
10 |
7 |
|
Typical Scan Angle (°) |
±12.5 |
±12.5 |
|
Gain Error (mrad) |
<5 |
<5 |
|
Zero Offset (mrad) |
<5 |
<5 |
|
Nonlinearity (%) |
<0.4 |
<0.4 |
|
Power Requirements |
±15VDC, ≥3A |
±15VDC, ≥3A |
|
Operation Temperature (℃) |
25±10 |
25±10 |
|
Weight (kg) |
Now the galvanometer costis reasonable, anything you need, please contact us.
在线联系供应商
Other supplier products
 |
5-axis Laser Micromachining System | The ordinary laser drilling system can only process the taper hole, and can not achieve the standard straight hole and inverted cone hole processin... |
 |
F-theta Lens | What is f theta lens Han's Scanner telecentric f theta lensseries products are the most commonly used parts in the laser field. After our continuo... |
 |
Laser Control Card | GMC is a galvanometer motion laser control cardindependently developed by Shenzhen Hans ScannerS&T Co., LTD. GMC galvo controlcard embedded sof... |
 |
Laser Control Card | Laser Control Card GMC is a galvanometer motion control card independently developed by Shenzhen Han's Scanner S&T Co., LTD. GMC galvo control... |
 |
Galvo Scanner | The single-axis galvo motor system contains a high-precision sensor and a motor part based on moving magnet technology. The motor rotor is optimize... |
Same products
 |
PTA-8500A High Speed SIM Card Personalization Machine | 卖方: shenyang piotec Technology co.,LTD | To meet high-volumn personalization production for SIM card with multi-chips, PTA-8500A was devel... |
 |
M2M Semiconductor Chip Personalization Machine | 卖方: shenyang piotec Technology co.,LTD | Machine-to-Machine (M2M) semiconductor chip making equipmentare specialized devices used in the p... |
 |
FPL6081 Banking CardFlexible Perso Line | 卖方: shenyang piotec Technology co.,LTD | To meet the diversified design of banking cards and order volume, PIOTECflexible personalization ... |
 |
FPL6061 Banking Card DOD Personalization Machine | 卖方: shenyang piotec Technology co.,LTD | FPL6061 is a personalized data writing machine for bank cards based on the FPL (Flexible Perso Li... |
 |
FPL6052 Banking Card Flexible Perso Line | 卖方: shenyang piotec Technology co.,LTD | The Piotec FPL series products are personalized production solutions tailored to the mass product... |
