Methylated Urinary Aldehyde Resin
Introduction
Methylated Urinary Aldehyde Resin: Properties and Applications
Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin
| Property | Specification | Importance |
|---|---|---|
| Chemical Structure | Modified urea-formaldehyde polymer | Determines reactivity and stability |
| Methylation Degree | 20-40% | Affects solubility and curing properties |
| Solid Content | 60-70% | Impacts formulation viscosity |
| pH Value | 7.5-9.0 | Influences storage stability |
| Viscosity (25°C) | 200-800 cps | Critical for application methods |
| Shelf Life | 6-9 months | Requires cool, dry storage |
Table 2: Industrial Applications and Performance
| Application | Function | Benefits |
|---|---|---|
| Wood Adhesives | Plywood/particleboard binder | Fast curing, improved water resistance |
| Foundry Coatings | Sand binder | Excellent thermal stability |
| Textile Finishing | Wrinkle-resistant agent | Enhanced fabric durability |
| Paper Strengthening | Wet-end additive | Increased wet tear strength |
| Abrasive Materials | Bonding agent | Improved grit retention |
Table 3: Comparison with Conventional Urea Resins
| Parameter | Methylated Resin | Standard UF Resin |
|---|---|---|
| Formaldehyde Emission | 30-50% lower | Higher emission |
| Water Resistance | 20% improvement | Moderate resistance |
| Cure Speed | 15-20% faster | Standard curing |
| Alkali Resistance | Excellent | Poor |
| Storage Stability | 6-9 months | 3-6 months |
Table 4: Recommended Formulation Guidelines
| Component | Wood Adhesive (%) | Foundry Binder (%) | Textile Finish (%) |
|---|---|---|---|
| Resin | 55-65 | 60-70 | 40-50 |
| Catalyst | 0.5-1.5 | 1-2 | 0.3-0.8 |
| Filler | 15-25 | 10-20 | – |
| Additives | 2-5 | 3-7 | 5-10 |
| Water | Balance | Balance | Balance |
Table 5: Safety and Environmental Profile
| Parameter | Value | Compliance |
|---|---|---|
| Formaldehyde Content | <0.5% free | Meets E1 standards |
| VOC Emission | <50 g/L | CARB compliant |
| Flash Point | >100°C | Non-flammable |
| Biodegradability | 40-60% | OECD 301B |
| Toxicity (LD50) | >2000 mg/kg | Low hazard |
在线联系供应商
Other supplier products
 |
High boiling aromatic hydrocarbon solvent | Introduction High boiling point aromatic hydrocarbon solvent than the traditional toluene, xylene little toxicity, Flash point is high, use and tr... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction TestItem Specification Contofwater%≤ 2.5 Soluble matter in water %≤ 2.0 Oil a... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
Daily Chemical Coloring | Introduction The series coloring agents bring a burst of vibrancy to the daily chemical industry. They quickly disperse and fully dissolve in wate... |
 |
Styrene CAS 100-42-5 | Introduction Styrene SDEB is a type of styrene produced by catalytic dehydrogenation of ethylbenzene. It is used to manufacture polystyrene, ABS p... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
