77PD (4030) CAS 3081-14-9 N, N’- bis-(1,4- Dimethylpentyl)-p-Phenylenediamine
Introduction
Chemical Name:N, N’- bis-(1,4- Dimethylpentyl)-p-Phenylenediamine
CAS NO.:3081-14-9
Product Specification:
| Appearance | Brownish Red Oily Liquid | |
| Purity(GC),% | ≥ | 94.0 |
| Heat Loss(65-70°C ),% | ≤ | 0.50 |
| Ash,% | ≤ | 0.10 |
| Viscosity(25°C), mPa·S | 56.0-85.0 | |
◆Performance:
-77PD has excellent static ozone resistance performance;
-77PD can improve flexural fatigue;
-77PD has a certain protective effect on the catalytic oxidation of copper, manganese and other variable-valent metals;
-77PD has good solubility in rubber, it is not easy to bloom rubber materials at high concentration.
◆Application:
-77PD is suitable for the rubber materials that need static anti-ozone protection in the long term, such as aircraft tires, engineering tires, agricultural tires, hose and gasket rubber products;
-77PD can be used as antioxidant for fuels;
In the production of styrene monomer, p-methylstyrene, divinylbenzene and acrylate, 77PD can be used as a polymerization inhibitor.
◆Packaging :Galvanized iron drum, 170kg per drum.
3081-14-9 –Physico-chemical Properties
| Molecular Formula | C20H36N2 |
| Molar Mass | 304.51 |
| Density | 0.9452 (rough estimate) |
| Boling Point | 435.32°C (rough estimate) |
| Water Solubility | 800μg/L at 22℃ |
| Vapor Presure | 0Pa at 25℃ |
| pKa | 8.59±0.50(Predicted) |
| Refractive Index | 1.6450 (estimate) |
3081-14-9 –Risk and Safety
| Toxicity | LD50 oral in rat: 750mg/kg |
3081-14-9 –References
| LogP | 6.3 at 20℃ |
| category | toxic substances |
| toxicity grade | poisoning |
| Acute toxicity | oral-rat LD50: 750 mg/kg; Oral-mouse LD50: 800 mg/kg |
| flammability hazard characteristics | flammability; Toxic NOx smoke from combustion |
| storage and transportation characteristics | warehouse ventilation and low temperature drying |
| fire extinguishing agent | dry powder, foam, sand, carbon dioxide, water mist |
在线联系供应商
Other supplier products
 |
4,4′-Diaminodiphenylsulfone CAS 80-08-0 | CAS:80-08-0, 80-08-0 – Names and Identifiers Name 4-Aminophenyl sulfone Synonyms DDSEPORALDapsone4,4′-DDSDISULONENOVOPHO... |
 |
CAS 3081-01-4 7PPD N-(1,4- Dimethylpentyl)-N’- phenyl-p-phenylenediamine | Introduction Chemical Name:N-(1,4- Dimethylpentyl)-N’- phenyl-p-phenylenediamine CAS NO.:3081-01-4 Product Specification: Appearanc... |
 |
Fully Methylated Melamine-Formaldehyde Resin | Introduction Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties CategoryDetails Chemical Type Hexametho... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
