CAS 98-95-3 Nitrobenzene
Introduction
Chemical Name: Nitrobenzene
CAS Registration Number: 98-95-3
Product Specifications:
| Appearance | Light yellow liquid | |
| Mass fraction of moisture (%) | ≤ | 0.10 |
| Content of nitrobenzene,% (m/m) | ≥ | 99.50 |
| Crystallization point of dry product (°C) | ≥ | 5.4 |
| PH value | 5-9 | |
| Total nitrotoluene, % (m/m) | ≤ | 0.10 |
| Content of low-boiling residues, % (m/m) | ≤ | 0.1 |
| Content of high-boiling residues, % (m/m) | ≤ | 0.1 |
◆Performance & Application:
-Nitrobenzene is an important chemical raw material, which can be used to produce a variety of pharmaceutical and fuel intermediates, as well as rubber accelerators, paints, explosives, etc.
-The main use of nitrobenzene is to hydrogenate it to aniline.
◆Packaging:
-Packed in clean and dry steel drums or transported by tank.
◆Application fields
Nitrobenzene is an important organic intermediate. Nitrobenzene is sulfonated with sulfur trioxide to obtain 3-nitrobenzene sulfonic acid. It can be used as a mild oxidant for dye intermediates and anti-dyeing salt S. Nitrobenzene is sulfonated with chlorosulfonic acid to obtain m-nitrobenzene sulfonyl chloride, which is used as an intermediate for dyes, medicines, etc. Nitrobenzene is chlorinated to obtain 3-nitrochlorobenzene, which is widely used in the production of dyes and pesticides. After reduction, m-chloroaniline can be obtained. It is used as the orange base GC of dyes and is also an intermediate for medicines, pesticides, fluorescent brighteners, organic pigments, etc. Nitrobenzene can be re-nitrated to obtain m-dinitrobenzene, which can be reduced to obtain m-phenylenediamine, which is used as a dye intermediate, epoxy resin curing agent, petroleum additive, cement accelerator, and m-dinitrobenzene can be partially reduced with sodium sulfide to obtain m-nitroaniline. It is the orange base R of dyes and is an intermediate for azo dyes and organic pigments.
◆Safety precautions
When handling nitrobenzene, you should use personal protective equipment, such as gas detection tubes and portable gas detectors.
在线联系供应商
Other supplier products
 |
Polyurethane adhesive | Polyurethane Adhesives: Versatile and High-Performance Solutions Polyurethane adhesives are a versatile and high-performance category of adhesives... |
 |
PUR reactive polymer | Introduction PUR reactive polyurethane is a single component, moisture reactive structural adhesive. It has the characteristics of fast initi... |
 |
CAS 865-48-5 | Sodium-t-butoxide CAS 865-48-5 Purity / Analysis Method >98.0%(T) Molecular Formula / Molecular Weight C4H9NaO= 96.10 Physica... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Introduction Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener compone... |
 |
Fluorinated surfactant solution STD 2461 | Introduction Composition: Fluorinated surfactant solution Appearance: light yellow viscous liquid Active ingredient: 18% Solvent: water/alcohol... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
