Powder Coating for Electrostatic Spray Application on Cold Surfaces
Product Description
MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manufactured from cast iron or steel. The powder coating is applied in one layer on cold surfaces by electrostatic spray application. The adhesion of MT R4-ES HJ601R to the metal substrate provides long term protection of the coated component. It ensures a reliable conservation to the function and value of the parts for the common water and gas distribution network. The applicator benefits from a modern and environmentally friendly process. Drinking water approvals are available.
Powder Properties
| Typical value | Method | |
| Binder System | Epoxy | |
| Density | 1.30 – 1.40 g/cm³ | ISO 8130-2 |
| Gel time at 200° C | 25 – 40 sec. | modified ISO 8130-6 |
| Particle size distribution |
< 32 µm = 25 – 40 % < 125 µm > 98 % |
Malvern ISO 8130-1 |
| Storage stability | 6 months from date of manufacture at ≤ 23° C | |
Application
Data Curing conditions :10 min., 190° C object temperature.
Material Properties
| Color | blue, ca. RAL 5015 | |
| Recommended film thickness | 120 – 220 µm | |
| Flow | smooth | |
| Gloss at 60° angle | 70 – 100 units | ISO 2813 |
| Cross cut | Gt 0 | DIN EN ISO 2409 |
在线联系供应商
Other supplier products
 |
Propylene Glycol Phenyl Ether (PPH) CAS 770-35-4 | Introduction Propylene glycol phenyl ether can be used as an excellent high boiling point organic solvent or modifier to replace toxic or odorous ... |
 |
Modified Silane Sealant | Introduction MT-667is a single component sealant based on silane modified polymer, which solidifies into an elastomer by reacting with moisture an... |
 |
Solvent Adhesive Series Products | Introduction The series of solvent based adhesive products includes single/two-component moisture cured solvent based polyurethane adhesives, as w... |
 |
Non Modified Cellulose Ether | Introduction Non Modified Cellulose Ether To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster,... |
 |
Rheology modifier STD-9010 | Introduction Composition: Polyamide wax dispersion Appearance: light yellow paste Active ingredient: 20% Solvent: Mixed aromatic hydrocarbons ... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
