jmy504 hf rfid reader and writer modules with pcd nxp rc522 rc523
JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
- Qualifications:
- • PCD: NXP RC522, RC523
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B
- • Operating distance: 80mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default OFF
- • EEPROM: 512 Bytes
- • Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
- • Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps
- • Max.command length: 254 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC 5.0V
- • Power consumption: 50mA
- • Dimension: 42mm×21mm×8mm
- • Package: DIP32
- • Weight: about 15g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Other supplier products
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
jmy506 iic i2c uart interface hf rfid reader and writer modules |
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of con... |
|
|
hf 13.56mhz ISO15693 ID reader - mr760 |
MR760 series, based on NXP SL RC400, is the desktop reader. The reader supports series IC cards according to ISO15693, and the reader imitates the ... |
|
|
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 |
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
|
|
jmy601 uart TTL Level interface rfid reader and writer modules |
JMY601 series are RFID reader/writer module with UART serial ports. JMY601 has various functions and supports multi ISO/IEC standard of contactless... |
供应产品
Same products
