.

AOC (ACTIVE OPTICAL CABLE)

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces. As a leading AOC factory, T&S active optical cable assemblyisdesigned in to meet needs for high-density cabling interconnect systems like data centers, and high-performance computing application.

T&S Communication Active Optical Cables (AOCs) achieve high data rates over long reaches, using a fraction of the power of other brands while providing streamlined installation for high-performance computing and storage applications. As a professional AOC factory in China, T&S offers a wide range of active optical cables, such as 100G QSFP28 AOC,10G SFP+ AOC, 25G SPF28 AOC(or 25G AOC), etc, with different specifications at good prices. Feel free to contact us at any time!

400G QSFP-DD AOC

View More

400G QSFP-DD AOC

200G QSFP56 AOC

View More

200G QSFP56 AOC

200G QSFP56 Breakout AOC

View More

200G QSFP56 Breakout AOC

100G QSFP28 AOC

four-channel full-duplex active optical cable with QSFP28 plugs

multirate capability of 10Gb/s and 25Gb/s per channel

reliable VCSEL array technology using MMF, hot Pluggable etc

View More

100G QSFP28 AOC

100G QSFP28 Breakout AOC

electrical interface compliant to SFF-8436 and SFF-8431

850nm VCSEL laser and PIN photo-detector

Built-in digital diagonostic functions, hot Pluggable etc

View More

100G QSFP28 Breakout AOC

56G QSFP+ AOC

four-channel full-duplex active

optical cable with QSFP+ plugs

electrical interface compliant to SFF-8436

support 56GE data rate etc

View More

56G QSFP+ AOC

40G QSFP+ AOC

four-channel full-duplex active

optical cable with QSFP+ plugs

electrical interface compliant to SFF-8436

support 40GE data rate etc

View More

40G QSFP+ AOC

40G QSFP+ Breakout AOC

electrical interface compliant to SFF-8436 and SFF-8431

850nm VCSEL laser and PIN photo-detector

built-in digital diagnostic functions

View More

40G QSFP+ Breakout AOC

25G SPF28 AOC

electrical interface compliant to SFF-8431

850nm VCSEL laser and PIN photo-detector

maximun link length of 150m on OM2 MMF and 300m on OM3 MMF

hot Pluggable

View More

25G SPF28 AOC

10G SFP+ AOC

electrical interface compliant to SFF-8431

850nm VCSEL laser and PIN photo-detector

maximum link length of 150m on OM2 MMF and 300m on OM3 MMF

hot Pluggable etc.

View More

10G SFP+ AOC

AOC Application

Infiniband FDR/EDR

Fiber channels with different specifications

High-performance computing interconnect

Ethernet, Datacenters

FAQs of Active Optical Cable

What is CWDM4 MSA?

CWDM4 MSA is a general specification for low-cost 100g optical interface, 2km in data center application.

CWDM4 MSA alliance was jointly launched by Avago, Finisar, JDSU and Oclaro on March 31, 2014. Four 25gbps signals are used and multiplexed to two single-mode optical fibers by CWDM. IEEE 802.3bj kr4 RS FEC technology is adopted.

CWDM MSA said the release of the standard has collected feedback from more than 40 companies, including system OEMs, optical module manufacturers, chip manufacturers, fiber optic cable manufacturers, etc. At present, members of cwdm4 MSA alliance include:

Avago Technologies

Brocade

ColorChip

Finisar

HiLight Semiconductor Ltd

Hitachi Metals

II-IV Incorporated

JDSU

Juniper Networks

Kaiam

Mitsubishi Electric

NeoPhotonics

Oclaro

Oplink

SiFotonics

Skorpios Technologies

Sumitomo Electric

What is LWDM?

The full name of lwdm is Lan WDM, which usually refers to a wavelength range dense WDM technology in 100g optical modules. According to the wavelength defined by IEEE 802.3, the wavelength of LAN WDM mainly covers 10km.

The wavelength is 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm.

What is pam4 technology?

Pam4 is a kind of PAM (pulse-amplitude modulation) modulation technology, namely fourth-order pulse amplitude modulation.

PAM signal is a popular signal transmission technology after NRZ (nonreturn to zero).

NRZ signal uses high and low signal levels to represent 1 and 0 of digital logic signal. Each clock cycle can transmit 1 bit of logic information.

Pam4 signal is transmitted by four different signal levels, and each clock cycle can transmit 2-bit logic information, namely 00, 01, 10, 11.

Therefore, under the same baud rate, the bit rate of pam4 signal is twice that of NRZ signal, the transmission efficiency is doubled, and the cost can be effectively reduced.

What kind of SFPs?

SFP, small hot pluggable module. Finger sized transceivers are suitable for many different rates and protocols, including multimode fiber, single-mode fiber, copper wire, and multi-wavelength interfaces for WDM systems. In a pluggable transponder, a pluggable network card is used to transmit a specific wavelength of WDM.

T&S Communications, together with clients, is working to deliver fiber-optic communicationproducts to the best possible extent to customers in an efficient, effective, and green manner.



在线联系供应商

至: Sumbexauto
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

FIBER OPTIC PRODUCTS COMPONENTS & ACCESSORIES SUPPLIER
FIBER OPTIC PRODUCTS COMPONENTS & ACCESSORIES SUPPLIER T&S is dedicated to provide satisfying products to users in every single project. We create value through professional knowhow, unique producti...
IP LC/SC FIBER CABLE
IP LC/SC FIBER CABLE The IP connector together with supported cable is applied to 4G,5G, Base Station remote radios, and fiber to the antenna transmission. Besides of t...
FBG SENSOR
FBG SENSOR FBG SensorFBG sensors can be deployed in harsh environments including high temperature, high radiation, high vacuum, high pressure and low temperat...
GRADE B PATCH CORD
GRADE B PATCH CORD T&S grade B patch cord connectoris the patchcordwith the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum ...
The Difference Between Fiber Patch Cord and Fiber Pigtail
The Difference Between Fiber Patch Cord and Fiber Pigtail The Difference Between Fiber Patch Cord and Fiber Pigtail Fiber pigtails patch cordsare cables directly connected to desktop computers or devices ...
供应产品

Same products

Ball Lensed Fiber
Ball Lensed Fiber 卖方: SHENZHEN PHOTONSTREAM LIMITED Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin...
Angle Polished Lensed Fiber
Angle Polished Lensed Fiber 卖方: SHENZHEN PHOTONSTREAM LIMITED The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully...
976nm 350W Fiber Coupled Laser Diode
976nm 350W Fiber Coupled Laser Diode 卖方: SHENZHEN PHOTONSTREAM LIMITED 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ...
940nm Fiber Coupled Laser Diode
940nm Fiber Coupled Laser Diode 卖方: SHENZHEN PHOTONSTREAM LIMITED 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ...
940nm Band Pass Filter Optical Fiber
940nm Band Pass Filter Optical Fiber 卖方: SHENZHEN PHOTONSTREAM LIMITED 940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while...