SFP28 25G Copper Twinax Cable XM DAC
SFP28 Direct Attach Cables (25G DAC) are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). The SFP28 passive direct attach copper cable assemblies are high-performance, cost-effective I/O solutions for 25G Ethernet. SFP28 copper cables allow hardware manufacturers to achieve high port density, configurability, and utilization at a very low direct attach sfp+ copper transceivercost and reduced power budget of passive copper cable.
As one ofprofessional optical transceiver companies, we also provide a range of optical transceivers, such as 400g optical transceiver, 100g optical transceivers, 40g qsfp+aatransceiver, 25g sfp28 transceiver, 10G SFP+transceiver, sfp device, etc.
Compatibility of SFP28 DACCable
SFP-H25G-CU5M5M 25G SFP28 DAC
SFP-H25G-CU3M3M 25G SFP28 DAC
SFP-H25G-CU2M2M 25G SFP28 DAC
SFP-H25G-CU1M1M 25G SFP28 DAC
Technical Specification Of SFP28 25GDACCablexM
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Note |
|
Differential Impedance |
TDR |
90 |
100 |
110 |
Ώ |
|
|
Insertion loss |
SDD21 |
-22.48 |
-8 |
dB |
At 12.8906 GHz |
|
|
Differential Return Loss |
SDD11 |
-12.45 |
See 1 |
dB |
At 0.05 to 4.1 GHz |
|
|
SDD22 |
-3.12 |
See 2 |
dB |
At 4.1 to 19 GHz |
||
|
Common-mode to common-mode output return loss |
SCC11 |
-2 |
dB |
At 0.2 to 19 GHz |
||
|
SCC22 |
||||||
|
Differential to common-mode |
SCD11 |
-12 |
See 3 |
dB |
At 0.01 to 12.89 GHz |
|
|
return loss |
SCD22 |
-10.58 |
See 4 |
At 12.89 to 19 GHz |
||
|
Differential to Common Mode |
SCD21-IL |
-10 |
dB |
At 0.01 to 12.89 GHz |
||
|
Conversion Loss |
See 5 |
At 12.89 to 15.7 GHz |
||||
|
-6.3 |
At 15.7 to 19 GHz |
|||||
|
Channel Operating Margin |
COM |
-3 |
dB |
在线联系供应商
Other supplier products
 |
aoc ethernet cable | AOC refers to Active Optical Fiber which requires optical transceiver devices to convert electrical signals into optical signals, or convert optica... |
 |
QSFP 100G 850nm 100m MPO Transceiver | QSFP 100G 850nm 100m MPO Transceiver(100g sr4) is a parallel 100Gb/s Quad Small Form-factor Plug-gable (QSFP28) optical module. 100g qsfp28 sr4 pro... |
 |
SFP+ 10G 1310nm 10Km LC Transceiver | The GHS3L0C31 1310nm DFB 10Gigabit Transceiver is designed to transmit and receive serial optical data over single-mode optical fiber with 10Km.The... |
 |
FP+ 10G Tx1330/Rx1270 80Km LC Transceiver | GHS7L0C54 is a hot-pluggable 3.3V small-form-factor transceiver module. It is designed expressly for high-speed communication applications that req... |
 |
SFP 155M 1550nm 80Km LC Transceiver | GearLink’s 100M SFP optical fibre transceiverGAS7L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA).... |
Same products
 |
Ball Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | Ball lensed fiber is an optical fiber with a spherical lens at one end. It improves light couplin... |
 |
Angle Polished Lensed Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | The Angle Polished Fiber Tip refers to the angled end of an optical fiber that has been carefully... |
 |
976nm 350W Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 976nm 350W Multi-emitter Package Fiber Coupled Laser Diode is a high-power laser module designed ... |
 |
940nm Fiber Coupled Laser Diode | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Fiber Coupled Laser Diode is a high-quality laser module that emits an infrared laser beam ... |
 |
940nm Band Pass Filter Optical Fiber | 卖方: SHENZHEN PHOTONSTREAM LIMITED | 940nm Band Pass Filter Optical Fiber selectively transmits light with a wavelength of 940nm while... |
