High Pressure Rubber Joint
The dismantling joint is designed to be the final closing piece in the pipe network, to ease
the assembling and disassembling for later maintenance of a pump or valve. A standard
adjusting range of 50mm on length and a small lateral and angular misalignment can be
accommodated. This adjustability of the dismantling joint facilitates for easy removal of
pumps and valves in circumstances of inspection, maintenance or replacement.
Features and Benefit:
• Compensate for differences in flange to flange distance
• Simplify the installation of pipelines
• Integrate a valve or pump into a flanged pipe network
• Flange connection, flange drilling can base on DIN PN6/16/25, ANSI CLASS150/300, JIS, EN, etc
• Reduce assembling time
• Dismantle for service, inspection and maintenance
• Epoxy powder coating and bolting made of steel
• Drinking water approved
Specifications
Nominal diameter: DN80mm to DN3000mm
Maximum working pressure: 4.0 Mpa
Vacuum KPa(mmHg) 44.9(350)
Operating temperature: -20℃-80℃
Corrosion resistance Good
Applicable media Sea water, drinking water, slurry, industrial sewage.
Components/Materials/Functions
No. Components Materials Functions
1 Sleeve Ductile Iron Expansion
2 Flange Ductile Iron Connection
3 Anchor Ductile Iron Support
4 Seal Rubber Seal
5 Stud Carbon Steel, Galvanized Fasten
Note:
• Flanges are according to DIN PN16, ANSI/JIS/EN standard can be supplied upon request.
• Design Pressure: 16 bar.
• Rubber: EPDM, NBR, NEOPRENE or upon request.
• Materials are various to meet per requirement.
Other supplier products
|
|
Soft-sealing gate valve |
Rising Stem Resilient gate valve (Rising Stem Soft-sealing Gate Valve)
Rising stem resilient gate valves not only has advantages of resilient seate... |
|
|
expansion joints |
Description:
1.Ductile Iron expansion joint
2.Ductile iron body, galvanized bolt and nut, EPDM Gasket
3.Standard: ISO2531/EN545
1) Product In... |
|
|
High Pressure Rubber Joint |
High Pressure Rubber Joints, is also one type of single arch rubber joints, are integral rubber flanged designed for piping systems to absorb pipe ... |
|
|
High Pressure Rubber Joint |
Flange adaptors are the most basic type of dismantling joint. On one side, it has a flange connection in accordance with the required flange standa... |
|
|
Wafer Butterfly Valve |
Butterfly Swing Check Valve
Our product-Wafer type butterfly check valve consist of valve body,disk,valve rod,spring and other parts, adapted wafer... |
供应产品
Same products
