Clear Low Iron Patterned Tempered Solar Panel Arc Photovoltaic Glass
If you want to buy discount and quality clear low iron patterned tempered solar panel arc photovoltaic glass made in China, you can contact Migo Glass which is one of the best manufacturers and suppliers of clear low iron patterned tempered solar panel arc photovoltaic glass in China. We have a professional factory at your service, please feel free to wholesale cheap and customized glass products in stock at a reasonable price with us.Basic InfoModel NO.: 3.2mmAppearance: Flat TemperedSteel Degree: Super-Tempered GlassTechnics: Physically TemperedMaximum Size: 1200*2200mmSolar Transmittance: Over 93.6%Application: Solar PanelPackage: Wooden Cases with Paper InterlayerOrigin: Shandong, ChinaIron Content: Less Than 0.012%Trademark: Migo GlassSpecification: ISO, CE, SPF, SGSHS Code: 70071900Product Description Clear Low Iron Patterned Tempered Solar Panel ARC Photovoltaic Glass, combined with nanometer anti-reflective coating technology,increase solar transmittance by way of decreasing light reflectance and improve the solar cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of the high solar lights transmittance, the low reflectance, the low iron, the high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used to photovoltaic power generation all over the world.ProductsClear Low Iron Patterned Tempered Solar Panel ARC Photovoltaic GlassThickness3.2mm,4.0mmSizeCan be customized,maximum size:1200*2200mmSolar transmittance3.2mm>93.6%,with AR coatingApplicationsFor solar cell modulePayment termsT/TDeliveryWithin 15-30 days after receiving the deposit MOQ2500 sqmPortQingdaoFeatures of our Clear Low Iron Patterned Tempered Solar Panel ARC Photovoltaic Glass:1. High solar lights transmittance2. The low reflectance: visible light reflectance is less than 7.30%3. Low iron:glass has only 0.012% of iron content;4. High intensity,the strength is 3-5 times of ordinary annealed glass5. Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;6. Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;7. Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury. Test Standards Test method Results 1 Appearance EN1096-2 Surface is clean, no scratches,spots or pinhole Qualified 2 Light transmittance ISO 9050 The ratio after coating is higher than before >2.5>2.6 3 Adhesion ASTMD3359 The cutting edge is very smooth , no grid slide, 0 level4 Pencil hardness ASTMD3363 No thickness of film which scratched by pencil more than 3mm≥6H 5 Salt spray test EN1096-2With 5%(±1)NaC1,under 35ºC,last 4-9days,record the data before and after the test, T<1.0 4 days, T=0.57 9 days, T=0.91 6 Thermal CycleIEC61215/10 Keep the temperature between -40ºC and 85ºC,±2ºC,200 times,(around 1000 hours),record the data before and after the test,T<1.0 T=0.48 7 Muggle Test IEC61215/10 Under 85ºC,±2ºC,relative humidity is 85ºC,±5ºC,around 1000 hours,record the data before and after the test,T<1.0 T=0.638 Wet-cold test IEC61215/10 Humidity is 85,±5ºC,temperature is 85ºC,±2ºC,fall to -40ºC,cycle for 10 times.Record the data before and after the test,T<1.0 T=0.80 9 Outdoor exposure IEC61215/10 Test with the moniter in outdoor temperature,total radiation need to be 60kmh·m-2 .Record the data before and after the test,T<1.0 T=0.59 10 Mechanical Loading IEC61215/10 Adding the load to 2400Pa and make it distributed.Keep 2-3 times;the layer wasn't broken and no serious defects in appearance Qualified Comparative Spectrum of 3.2mm Solar Glass with ARC and Non-ARCMigoGlass Competitive Advantages:a. 20 years experience in glass production and export. b. Direct factory price, quick delivery, professional package and container loading design.c. Quality assurance. ISO 9001:2008 Quality System Certification. Glass products with CE certification, SGS test reports. d. Full range of glass supply, offering one-stop purchase. e. Excellent sales team, offering personalized and dedicated pre-sale and after-sale serviceFAQ:1. MOQ: 1 × 20 GP. Our salesperson can help calculate the loading quantity of a 20ft container.2. Payment terms:T/T; 30% advance payment, 70% balance against the copy B/L.3. Delivery time:Normally, goods will be delivered to the cargo vessel within 30 days after receiving the advance payment. In the case of urgent order, we can deliver them within 15 days.4. Shipping port:Qingdao port5. Samples: Small glass samples can be provided at our cost.Contact Us:To get the latest prices, feel free to or call us (pls state clearly glass sizes, edge grinding, order quantity, destination port...).We will get in touch with you within 24 working hours.
Other supplier products
供应产品
Same products
