Polyurethane Foam Insulation Pipe
PRODUCT PARAMETERS
If you are finding , we will be your best choose! We have our own factory, so we can give you a cheap price!
Product Indexes |
Reference Standard |
Standard Requirement |
Our product value |
Outer protection pipe |
|||
Density (kg/m3) |
CJ/T114-4.2.3.1 |
≥940 |
|
Elongation at break (%) |
CJ/T114-4.2.3.4 |
≥350 |
618 |
Tensile yield strength (MPa) |
CJ/T114-4.2.3.4 |
≥19 |
|
Longitudinal shrinkage rate (%) |
CJ/T114-4.2.3.5 |
≤3 |
|
Long term Mechanical properties |
CJ/T114-4.2.3.6 |
>1500h(80℃,4.0 MPa)free from damage |
Pass |
The difference of the melt flow rate (g/10min) |
CJ/T114-4.2.3.2 |
≤0.5 |
|
Carbon Black Content % |
CJ/T114-4.2.3.1 |
||
Polyurethane insulation layer |
|||
Density (kg/m³) |
CJ/T114-4.3.2 |
≥60 |
|
Average pore size (mm) |
CJ/T114-4.3.1 |
≤0.5 |
qualified |
Percentage of close area(%) |
CJ/T114-4.3.1 |
≥88 |
94 |
Compressive strength(MPa) |
CJ/T114-4.3.3 |
≥0.3 |
|
Water absorption(%) |
CJ/T114-4.3.4 |
Immersion in boiling water 90 minutes, bubble water absorption should be not more than 10% |
≤5.53 |
Working steel pipe |
|||
Seamless steel pipe(≤DN150) |
GB8163 |
20# |
qualified |
Spiral steel pipe(≥DN200) |
GB/T9711 or SY/T5037 |
Q235B |
qualified |
PRODUCT FEATURES
Product name |
Thermal insulation direct buried pipe |
Length |
|
Nominal diameter |
DN25-1800 |
Laid way |
Buried |
Application |
Fluid Pipe, Natural gas, Gas, Oil, Hydraulic, chemical, drill, etc. |
Production Standard |
The national standard GB/T29047-2012, CJ/T114-2000, CJ/T155-2001 |
TECHNICAL INDICATORS
Nominal diameter |
OD ×Thickness(mm) |
Outer protection tube diameter ×Wall thickness(mm) |
Insulation thickness(mm) |
25 |
32x3 |
29 |
|
32 |
43x3 |
33 |
|
40 |
48x3 |
31 |
|
50 |
57x3 |
34 |
|
65 |
140x3 |
33 |
|
80 |
89x4 |
33 |
|
100 |
108x4 |
36 |
|
125 |
46 |
||
150 |
|||
200 |
219x6 |
48 |
|
250 |
273x6 |
46 |
|
300 |
325x7 |
420x7 |
|
350 |
377x7 |
||
400 |
426x7 |
62 |
|
450 |
478x7 |
61 |
|
500 |
529x7 |
63 |
|
600 |
630x8 |
760x11 |
65 |
700 |
720x8 |
850x12 |
65 |
800 |
820x9 |
960x13 |
70 |
900 |
920x10 |
1054x14 |
67 |
1000 |
1020x12 |
1155x14 |
77 |
1200 |
1220x12 |
1380x15 |
80 |
1400 |
1420x14 |
1680x16 |
114 |
在线联系供应商
Other supplier products
Environment Friendly Rock Wool Board | products are made from natural mineral wool such as basalt and dolomite. Density Thickness kg/m3 mm 60 50 70 80 100 150 ... | |
Mineral Wool Board | Rock Wool is made from basalt, an inorganic raw material. Density Thickness kg/m3 mm 60 50 70 80 100 150 / 75 5... | |
Rock Wool Pipe supplier | / Mineral Wool Tube PRODUCT PARAMETERS ID(mm) Thickness(mm) 22 30 40 50 60 70 80 / / 27 30 40 50 60 70 80... | |
Heat Insulation Rock Wool Pipe | PRODUCT PARAMETERS ID(mm) Thickness(mm) 22 30 40 50 60 70 80 / / 27 30 40 50 60 70 80 / / 34 3... | |
Insulation Elbow | Polyurethane insulation pipe (, polyurethane insulation pipe and its connecting parts, including insulation tee, r, insulation elbow, insulation b... |
Same products
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... | |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... | |
NC50 PIN 4145H XT39 BOX Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh... | |
API 5CT 2-7/8"NUE N80 Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |