Steel Making Raw Material
Description of Steel Raw Material
Steel is one kind of alloy, made of iron and carbon. The carbon content is usually less than two percent and for manganese, silicon, phosphorus, sulfur, and oxygen，the the content is even smaller. Steel is the most important engineering and building materials in the world. In the steelmaking process, the impurities, such as nitrogen, silicon, phosphorus, sulfur and excess carbon (which is the most important impurities) are removed from the source iron. To produce different grades of steel, some different alloying elements such as manganese, nickel, chromium, carbon, and vanadium need to add.
The Steel-making Process
There are two main business processes for steelmaking: blast furnace basic oxygen steelmaking (using blast furnace liquid pig iron and scrap as the main feedstock) and electric arc furnace (EAF) steelmaking, which uses scrap or direct reduced iron (DRI) as the main feedstock. Oxygen steelmaking provides fuel mainly through the exothermic properties of the reaction inside the vessel. Instead, in EAF steelmaking, electrical energy is used to melt solid waste and/or DRI materials. In recent years, with more chemical energy introduced into the process, the development of EAF steelmaking technology has approached that of oxygen steelmaking.
The main difference between routes is the type of raw material they consume. For the BF-BOF route, it is mainly iron ore, coal, and recycled steel, while the EAF route uses recycled steel and electricity to produce steel. Depending on the configuration of the plant and the availability of recycled steel, other metallic iron sources such as direct reduced iron (DRI) or molten iron can also be used in the EAF route. Depending on the configuration of the plant and the availability of recycled steel, other metallic iron sources such as direct reduced iron (DRI) or molten iron can also be used in the EAF route.
The principle of steel-making is to use oxygen or iron oxide to remove the excess carbon and other impurities contained in pig iron into gas or slag under high temperature.
Huaro can provide different kinds of steel raw material, like iron ore, iron ore concentrate，HBI (Hot briquetted iron), DRI (Direct Reduced Iron) and steel pellets.
Huaro, as an excellent tinplate steel sheets supplier, offers a wide range of steel products for you to choose from.
Other supplier products
|
|
Iron Ore Concentrate |
Description of Iron Ore Concentrate
Iron ore concentrate is produced from the magnetite iron ore in the beneficiation process. When the iron ore is... |
|
|
Steel Making Raw Material |
Description of Steel Raw Material Steel is one kind of alloy, made of iron and carbon. The carbon content is usually less than two percent and for ... |
|
|
Anode Carbon Block |
Anode CarbonBlock Overview
It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode... |
|
|
Prepainted Galvanized Steel Coil |
General Description of Prepainted Galvanized SteelCoil
Pre-coated coil is a product obtained by chemical surface treatment (coating) of hot-dipped ... |
|
|
Steel Billet |
General Introduction of Steel Billet
Prime steel billetsare the second stage product in steel production. They belong to hot rolling and directly m... |
供应产品
Same products
