Double Socket Bend 45°
Zhucheng Three-dimensional Pipeline Co., Ltd is one of China main Manufactures of DCI Pipe Fittings. Built in 1993, over 20 years produce and marketing experence, enjoy well acceptance and good reputation from home and abroad. Ductile iron pipe fittings are according to ISO2531, BSEN545 / 598.They are mainly used for transferring the drinkable water, waste water and for irrigation and so on
Ductile iron Fittings include Double socket Bend, Socket Elbow, Flange Socket, Double socket tee, Socket Spigot tee, T Socket Fittings, Double Socket Reducer, Double Socket bends, All -Socket tees with 45 °angle banch, Double Socket Tee with Flange tee.
|
Inspection |
SGS, BV, third party inspection |
|
Material |
Ductile Cast Iron GGG50, QT500-7/450-10,FGS500-7,420-12 |
|
Standard |
ISO2531 BS EN545 EN598 BS4772 DIN2501,GBT13295 |
|
Flange drilled |
ISO7005-2,BS4504, EN1092-2, DIN2501 |
|
Pressure |
PN10, PN16,PN25 |
|
Specification |
DN50 to DN2000, K12/14 |
|
Joints type |
Flange, Typon joint(push on joint); Bolted Gland K typeJoint |
|
Application |
water supply project, drainage, sewerage, Irrigation ,water pipeline |
|
Certificates |
ISO2531:2009, EN545:2010,EN598 ISO9001, ISO14001,ISO18001. |
|
Surfce Inside |
Portland Cement mortar lining,bitumen paint, epoxy paint/powder |
|
Surface Outside |
Epoxy paint, bitumen paint, epoxy powder coating |
|
Accessories: |
SBR or EPDM Rubber Rings are available |
|
Packingmethods: |
woodencase/palletwithplasticlayer,oraspercustomer'srequirements, |
Zhucheng Three-dimensional Pipeline Co., Ltd.
在线联系供应商
Other supplier products
 |
Stepped couplings | Ductile iron Steped coupling are according to ISO2531, BSEN545/598.They are mainly used for transferring the drinkable water, waste water and for ... |
 |
Ductile Iron All flanged Tee | Ductile Iron All flanged Tee The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used fo... |
 |
Double Socket with Flange Branch | Zhucheng Three-dimensional Pipeline Co., Ltd is one of China main Manufactures of DCI Pipe Fittings. Built in 1993, over 20 years produce and marke... |
 |
All flanged Tee ISO2531 | The ductile iron flanged fittings are manufactured by Zhucheng Three-dimensional Pipeline Com., Ltd are mainly used for transferring the drinkable ... |
|
|
Double Socket Bend 45° | Zhucheng Three-dimensional Pipeline Co., Ltd is one of China main Manufactures of DCI Pipe Fittings. Built in 1993, over 20 years produce and marke... |
Same products
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
