Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B)
Liquid Tight Flexible Metal Conduit Fitting- S53 Series(UL 514B)
S53 Series
Liquid Tight Conduit Fitting, 90 Degree Elbow
Liquid Tight Metal Conduit Fitting S53 series is certified by UL laboratory according to UL514B and Canadian CSA-C22.2 No.56 standard. S53 series metal fittings are applied on the relay or end point of wiring system to connect metal conduits, junction box or enclosure for wiring extension and protection. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with male NPT thread system and connected with metal flexible conduit by a nut. This series of connector is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system ended to a junction box or enclosure. The compact structure of this fitting offers feature of moisture and water seal and high tensile resistance to protect the wiring system and benefit to apply to indoor or outdoor environments after assembled with the liquid tight metal flexible conduit series PULTG, PCBLTG, PHLTG and PNKLTG.
Metallic Fittings, Liquid Tight Flexible Metal Conduit Fitting Hot Sale China
Material: Zinc Alloy
Temperature Range : -20℃~+90℃
IP Rating : IP 66 (Fit with conduit series: PULTG, PCBLTG, PHLTG & PNKLTG)
Surface Finish : Chromate, other treatments are available by consult.
RoHS Compliance : Yes
Certificate : UL, cULus
Metallic Fittings, For Sale China Manufacturers
|
Nominal Conduit Size (mm) |
Nominal Conduit Size (inch) |
NPT Thread |
Part Number |
Package / Box (Pcs) |
Weight / Box (Kg) |
|
12 |
3/8 |
1/2" |
S531 - 3/8 |
200 |
|
|
16 |
1/2 |
1/2" |
S532 - 1/2 |
200 |
|
|
21 |
3/4 |
3/4" |
S533 - 3/4 |
160 |
|
|
27 |
1 |
1" |
S534 - 1 |
100 |
19 |
|
35 |
1-1/4 |
1-1/4" |
S535 - 1 -1/4 |
39 |
|
|
41 |
1-1/2 |
1-1/2" |
S536 - 1 - 1/2 |
30 |
|
|
53 |
2 |
2" |
S537 - 2 |
16 |
9 |
|
63 |
2-1/2 |
2-1/2" |
S538 - 2 - 1/2 |
12 |
|
|
78 |
3 |
3" |
S539 - 3 |
8 |
|
|
103 |
4 |
4" |
S5310 - 4 |
4 |
在线联系供应商
Other supplier products
 |
Flexible Metal Conduit Water + EMI Proof - PEG23PVCTB Series | Flexible Metal Conduit Water + EMI Proof - PEG23PVCTB Series Water Proof Flexible Metal Conduit-EMI shielding, PEG23PVCTB series is manufactured w... |
 |
Liquid Tight Flexible Metal Conduit Fitting - S53 Series(UL 514B) | Liquid Tight Flexible Metal Conduit Fitting- S53 Series(UL 514B) S53 Series Liquid Tight Conduit Fitting, 90 Degree Elbow Liquid Tight Metal Con... |
 |
Flexible Metal Conduit Water Proof - PAS23PVC Series | Flexible Metal Conduit Water Proof- PAS23PVC Series PAS23PVC Series Flexible Metal Conduit, Interlocked SUS, PVC Jacket Waterproof Flexible Meta... |
 |
Liquid Tight Flexible Metal Conduit - PLTG13PVC Series(Non-UL) | Liquid Tight Flexible Metal Conduit- PLTG13PVC Series(Non-UL) The full range of product is developed by following the conduit size of UL360 standa... |
 |
Liquid Tight Flexible Metal Conduit (UL Listed) | Liquid Tight Flexible Metal Conduit(UL Listed) Applicable for the protection of circuit with 600 volts or lower in locations where UL certificate i... |
Same products
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
