pipe union fitting
Union pipe fitting / Pipe union
A is a threaded fitting which allows the pipe work to be separated and reconnected without any horizontal movement in the pipe. It can be a standalone pipe fitting connecting two pieces of pipe or an integral part of another fitting (such as a ball valve) which allows it to be separated. A threaded with internal and external thread has good sealing tightness and can connect the pipes with the end of the external thread and the other end of the internal thread.
Maximum Pressure: 25 BAR (363PSI) (2.5MPA) CLASS 150
Maximum Temperature: 200°C (392°F)
Tensile Strength: 350MPA
Hardness: HB150 (Brinell)
Elongation Rate: 12%
Suitable Applications: Water, Oil, Gas, Petro-Chemical
Material: Malleable Iron
When you buy, please make sure that this key has a male interface and a female interface. The union of the cone seat guarantees a better seal and ensures that your piping system does not leak.
What are union fittings used for
‘s products are mainly used in water systems, petrochemical systems, gas systems, plumbing systems.
Advantages of pipe union:
-
This union has a high strength and good ductility, so the steel bar’s strength and ductility can be fully utilized.
-
It is convenient, fast, and easy to use the connection.
-
The inspection process is convenient and intuitive.
-
Sleeve manufacturing can be done in factories, so there is no construction period and high efficiency in processing.
-
No electricity, no gas, no open fire, no oil leaks, no pollution, no rain, no wind, all-weather construction.
-
As it can operate in narrow spaces where steel bars are densely arranged, it has strong applicability.
-
Horizontal and vertical steel bars of the same or different diameters can be connected.
在线联系供应商
Other supplier products
 |
black iron fittings | A Black Iron union tail is a detachable fitting used for accessory replacement. It’s part of a union and typically consists of a male tail, a... |
 |
g.i coupling | A is an essential component in plumbing and piping systems used to connect, control, and direct the flow of fluids such as water, gas, and other l... |
 |
90 degree elbow pipe | To understand the basic knowledge of an elbow, the determination of an elbow must know the diameter, radius, and angle of the elbow, and some have ... |
 |
4 way pipe connector | are multi-joint fittings that connect four pipe sections together at a central junction point. They are commonly used in plumbing, drainage, and i... |
 |
black iron fittings | A Black Iron union tail is a detachable fitting used for accessory replacement. It’s part of a union and typically consists of a male tail, a... |
Same products
 |
Seamless pipe | 卖方: Eastern Steel Manufacturing Co.,Ltd | Seamless pipe is a long steel strip with a hollow cross-section and no seams around it. &zw... |
 |
Galvanized Steel Grating for Drainage | 卖方: Hebei Canri wire Mesh co.,Ltd | Galvanized Steel Grating for Drainage Steel gratingfor drainage, also known as galvanised draina... |
 |
Floor Grating | 卖方: Hebei Canri wire Mesh co.,Ltd | Floor Grating Floor grating, also known as open grid flooringor bar grating, is a type of structu... |
 |
Serrated Bar Steel Grating | 卖方: Hebei Canri wire Mesh co.,Ltd | Serrated Bar Steel Grating Steel bar gratinghas two surface type: serrated surface and smooth su... |
 |
Stainless Steel Grating | 卖方: Hebei Canri wire Mesh co.,Ltd | Stainless Steel Grating Stainless steel gratinghas been the standard industrial foot walk produc... |
