ASTM A500 Steel Pipe
ASTM A500 Steel Pipe
ASTM A500 is the standard specification for circular, square, and rectangular tubes of cold-formed welded and seamless carbon steel structures. ASTM A500 is the most common specification for Hollow Structural Sections in North America. The correct way to specify the circular HSS section is to represent the outer diameter in decimal inches to three decimal places (i.e., 5.563 x 0.250) according to the nominal wall thickness.
Why A500 Steel Pipe?
Since ASTM A500 is a structural specification, circular high-speed steel produced according to this specification is suitable for structural applications and general construction purposes.
The specified yield strength of A500 Grade C pipe(the most commonly available grade) is 46 ksi. The specified yield strength of A500 Grade B pipeis 35 ksi. Yield strength increased by more than 30%. Therefore, the strength to weight ratio of A500 circular HSS is greater than that of A53 pipe. So, if you do the job with round HSS, you need less steel, by weight, to do the job—the lighter it is, the lower the cost.
The tolerances of A500 are tighter than those of A53, so the HSS of the A500 circle has higher quality and less variability.
Round HSS has a superior surface finish and is not as lacquered as normal A53 tubes. Since this lacquer coating needs to be removed from the A53 pipe to accommodate welding and painting, so this can save money and time.
ASTM A500 PipeApplications
All steel structures have their pros and cons including structural supports, building columns, highway signs, oil field services and communication towers, to name a few. But ultimately ASTM A500 is a better choice when you need a round profile.
We encourage architects, fabricators, structural engineers and contractors to read up on ASTM A500 and visit The Steel Tube Institute's website because it offers a wide variety of technical publications, load tables and design aids.
Hebei Tianchuang Pipe Co., Ltdalways sticks to its development principles of large scale, specialization and brand building. Now, the company products under "Tianyi" brand are extensively sold in all domestic markets in China as well as in overseas markets, such as Middle East, Africa, Europe, South America, and Southeast Asia, and have been highly recognized by construction units.
As the china steel pipe suppliers, the company holds to its operating philosophy of "Quality, promise keeping, mutual respects and benefits" and is devoted to building a century enterprise and to promoting the advancement and development of the industry!
在线联系供应商
Other supplier products
 |
Installation Standard for W Beam Guardrail | Before the highway guardrail installation, the construction preparation shall be made, the detailed construction scheme shall be determined, and th... |
 |
Highway Guardrail | The wave guardrail is composed of two corrugated steel highway guardrail plates and two vertical columns sandwiched between the two. The two-column... |
 |
BS1387, ASTM A500, JISG3444, General Construction Pipe, Black ERW and Galvanized Pipe | ERW Galvanized Pipeand Welding Black Steel Pipe (BS1387 Pipe, ASTM A500 Pipe, JISG3444 Pipe, General Construction Pipe) Specification: 3/4"-8" ... |
 |
AASHTO Highway Guardrail | AASHTO (American Association of State Highway and Transportation Officials) highway china guardrailmade by Tianchuang is of good quality and sold a... |
 |
Nuts | Nuts are fasteners with internal threads and are used with the conjunction of a screw and nut set. As a type of metric nuts, hex nuts are widely us... |
Same products
 |
All Flanged Cross | 卖方: Shanxi Midas Industrial Co., Ltd | The All Flanged Cross is suitable for a wide range of applications. It can be used in the oil and... |
 |
Flanged Ductile Iron Pipe | 卖方: Shanxi Midas Industrial Co., Ltd | Flanged pipe and fittings are typical components in rigid piping systems.Flanged pipe is commonly... |
 |
Centrifugally Cast Iron Pipe | 卖方: Shanxi Midas Industrial Co., Ltd | Centrifugal cast iron pipesare manufactured as per EN545 (Ductile iron pipes, fittings and access... |
 |
Ductile Iron Pipe K9, C class | 卖方: Shanxi Midas Industrial Co., Ltd | Material:Ductile iron grade 500-7/ 450-10 in accordance with ISO 1083 Standard:ISO 2531 & BS... |
 |
No130R Reducing Galvanized Pipe Fittings Tee | 卖方: 玉田县玉东铸造有限公司 | Product Overview USE for Fire protection with UL/FM certificated What is the difference between ... |
