Style Cast Iron Flange Adapter
SHORT DESCRIPTION
STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from gouges, indentations and deformities of any type for proper sealing. Refer to the installation instructions for complete information. • Vic-Flange Adapters must be assembled so there is no interference with mating components.
PRODUCT DETAIL
Gasket: (specify choice1) Grade “M” Halogenated Butyl Halogenated Butyl (Brown color code). Temperature range –20°F to + 200°F/–29°C to +93°C. Specifically compounded to conform to ductile pipe surfaces. Recommended for water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/ NSF 61 for cold +86°F/+30°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. Grade “S” Nitrile (Red color code). Temperature range –20°F to +180°F/–29°C to +82°C. Specially compounded to conform to flanged ductile iron pipe. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range; except hot dry air over + 140°F/+60°C) and water over +150°F/+66°C. STYLE Cast Iron FLANGE ADAPTER
NOT RECOMMENDED FOR HOT WATER SERVICES. 1 Services listed are General Service Guidelines only. flanged ductile iron fittings should be noted that there are services for which these gaskets are not compatible. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service guidelines and for a listing of services which are not compatible. Bolts/Nuts: (specify choice) Standard: Carbon oval steel neck track bolts meeting the mechanical property requirements of ASTM A449. Carbon steel heavy hex nuts meeting the mechanical property requirements of ASTM A563 Grade B. Track bolts and heavy hex nuts are zinc electroplated per ASTM B633 ZN/FE5, finish Type III (imperial) or Type II (metric). Optional: Bolts – Stainless steel, meeting the mechanical property requirements of ASTM F593, Group 2 (316 stainless steel), condition CW. Nuts – Stainless Steel meeting the mechanical property requirements of ASTM F594, Group 2 (316 stainless steel), condition CW, with galling reducing coating.2
在线联系供应商
Other supplier products
 |
Grooved Rigid Coupling 3/4 Cast Iron Coupling YN01 | Grooved rigid coupling 3/4 cast iron Coupling YN01UL/FM APPROVED Rigid Coupling: Ductile Iron, 4 in x 4 in Fitting Pipe Size, Grooved, Class 150 G... |
|
|
Style Cast Iron Flange Adapter | SHORT DESCRIPTION STYLE Cast Iron FLANGE ADAPTER The gasket seating surfaces on the pipe and on the face of the mating flange must be free from go... |
 |
Grooved Equal Tee No130 | YINUOGrooved Equal Tee No130 ductile iron grooved fittings: Grooved Equal Tee No130 grooved piping system is reliable and is faster to install tha... |
 |
Ductile iron grooved elbow 90 Degree No90 | Ductile iron grooved elbow 90 Degree No90 are one type of Grooved fittings. We supply both Blue and RAL3000 for difference used. Ductile iron gr... |
 |
Equal Tee Galvanized Malleable Iron Pipe Fittings No130 | Product Description Equal Tee galvanized malleable iron pipe fittings Cast Iron Fittings factory is located in CHINA (both manufacturing plants ... |
Same products
 |
All Flanged Cross | 卖方: Shanxi Midas Industrial Co., Ltd | The All Flanged Cross is suitable for a wide range of applications. It can be used in the oil and... |
 |
Flanged Ductile Iron Pipe | 卖方: Shanxi Midas Industrial Co., Ltd | Flanged pipe and fittings are typical components in rigid piping systems.Flanged pipe is commonly... |
 |
Centrifugally Cast Iron Pipe | 卖方: Shanxi Midas Industrial Co., Ltd | Centrifugal cast iron pipesare manufactured as per EN545 (Ductile iron pipes, fittings and access... |
 |
Ductile Iron Pipe K9, C class | 卖方: Shanxi Midas Industrial Co., Ltd | Material:Ductile iron grade 500-7/ 450-10 in accordance with ISO 1083 Standard:ISO 2531 & BS... |
 |
No130R Reducing Galvanized Pipe Fittings Tee | 卖方: 玉田县玉东铸造有限公司 | Product Overview USE for Fire protection with UL/FM certificated What is the difference between ... |
