Expansion connector pipe fitting fabric rubber duct connector

ProductInformation:

Fabricduct joint take advantage of high flexibility and high air impermeability and medium resistance of rubber as well as compliance and heat resistance of glass-fabric and is prepared at both ends with metal spool and flange in connection with wind machine and air duct ,which can compensate the thermal expansion by the operation of air duct and multi directions displacement. For better compliance of rubber and fabric and good sound absorption and vibration isolation ,the noise and vibration passage can be reduced effectively in the operation of boiler ,wind machine and air current.

ProductDescription:

Fabric expansion joint mainly consists if main body, duct cloth, rustproof metal pipe, pressing flange and air duct flange. According to the difference of compensator’s structures, it can be divided compensator for general air duct, compensator for anti-desulfurization, special compensator forfuel gas and oil, and compensator for water and abrasion resistance.

ProductApplications:

Application scope
Factory	Firepower power plant	Air escape of boiler and gas turbine
	Landification industry	Air escape of boiler and industrial furnace
	Fume extractor and desulfurizer	Warm and dry ventilating duct
	Metallurgy system	Fume and dust extraction of blast furnace
	Nucleus power plant	Air exchanging device
	Cement industry	Various kilns, dust collecting and fume and dusting extracting system
Equipment	Dust collector	Entrance and exit of wind machines of all the equipment
	Dust collector
	Air heater
	Washer
	Induced draft fan
	Fan

ProductFeatures:

· Extremely flexible Absorbing large movements

·Absorbing different movements simultaneously

·Only requiring a limited building length

·Lightweight

·Easy to handle, store, install, repair, replace

·Not transmitting noise or vibrations

·Reducing the necessary strength of fix-points and supports

·Not corroding

·Dimensionally stable

· Cost effective

ProductInstallation:

In order to make air duct compensator achieve available effect in pipe and all mechanical performance play their right role and extend its use life, please make installation according to the requirements as follows:

• Air duct compensator should be installed in pipe in natural conditions and the product distortion by contrived factors should be made in installation, so the products will avoid from early damage and weaker application effect.
• When air duct compensator is installed to connect with flange, screw of bolt should stretch to the outside of flange to prevent the rubber (fabric) ball from being scraped by whorl tip. The bolt on the face of each flange should be screwed down equably by thread and it is required that all the degree of tightness should be as consistent as possible. In bad conditions, spring gasket can be added except flat gasket to avoid nuts from loosing.

ProductParameters:

Other supplier products

	High temperature industrial expansion bellows expansion joint at pump discharge	ProductInformation: ZHW expansion bellows have been designed to control vibration, reduce noise, relieve stress, prevent system shock and compensa...
	Pipe machine expansion joint oil resistance rubber flexible joint	ProductPerformance: Air flue rubbber compensator is made under high pressure, high temperature molding and cross link. It owns higher density insi...
	Single sphere floating flange jis flexible rubber joint	ProductPerformance: Ansi standard flexible pipe rubber joint is extremely suitable for places where there are complex geologic conditions, large s...
	HX601 din standard rubber connector rubber flexible flange joint	ProductInformation: Rubber expansion joints are flexible connectors fabricated of nature rubber or synthetic elastomers, steel ring and fabrics, a...
	Mould pressing galvanized screwed rubber expansion joint	ProductInformation: ZHW Series MX601 are designed for piping systems to absorb pipe movements, relieve stress, reduce system noise/vibration, comp...

供应产品

Same products

	UHMWPE pipe for mining in Australia	卖方: 00000	UHMWPE pipe for mining in Australia Discover the Ultimate Solution: Are you ready to eleva...
	20543RW Interlock One Piece Fittings	卖方: Hebei Zhongke Huatai Fluid Technology Co., Ltd	20543RWInterlock One Piece Fittings Product Introduction H20543RW HT H...
	20411RW One Piece Fittings	卖方: Hebei Zhongke Huatai Fluid Technology Co., Ltd	HT HydraulicsSince 1987 Hydraulic Hose Fitting -One Piece Fittings Metric Female 24° Cone O-...
	26713RW Interlock One Piece Hose Fittings	卖方: Hebei Zhongke Huatai Fluid Technology Co., Ltd	HT Hydraulics Since 1987 Hydraulic Hose Fitting-Interlock One Piece Fittings JIC FEMALE 74° ...
	Cup Nut Pipe Loop	卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Size: 1”~8”Material: Carbon SteelDimension: UL 203, MSS SP-58/69 (Type-7)Surface: Pre...