Pipe Tee, Tee Fittings
A tee is also called triplet,three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but 'reducing' tees are available as well. it means the one or two ends are differ in dimension.due to thisdimension differ,the makes the tee fittings with the capacity to control the volume when requried.
Weled Tee
Nominal size: 1/2"-48" (DN15-DN1200)
Wall Thickness: 2-100mm
Bend Radius: SCH5S-SCH160, XXS
Type: Tee/Reducing tee
Seamless Tee
Nominal size: 1/2"-20"(DN15-DN500)
Wall Thickness: 2-50mm
Bend Radius: SCH5-SCH160
Type: Tee/Reducing tee
Other supplier products
|
|
Mechanical Seamless Steel Tubing |
Usage: Applicable to the general structure, mechanical structure with seamless steel tubes.
Quality Standard:ASTM A 53 Standard Specification for ... |
|
|
LSAW Steel Pipe |
Usage: Used for low pressure liquid delivery, such as water, gas, and oil.Process:LSAW (Longitudinal Submerge-arc Welded) UO(UOE)、RB(RBE)、JCO(JCOE)... |
|
|
Galvanized Steel Pipe |
Galvanized steel pipe(galvanized pipe), Galvanised steel pipe(galvanised pipe)
Galvanized steel pipes are made of steel that has been covered with... |
|
|
Pipe Tee, Tee Fittings |
A tee is also called triplet,three way and "T" pieces and it can be used to either combine or split a fluid flow. Most common are tees with the sam... |
|
|
ERW Steel Pipe/ERW Carbon Steel Pipe |
Usage: Used for low pressure liquid delivery, such as water, gas, and oil.Process:ERW (Electric Resistance Welded)HFI (High Frequency Induction)EFW... |
供应产品
Same products
