Ship Class Steel Plate

Because of the bad working environment, hull to corrosion by seawater chemical corrosion, electrochemical corrosion and marine organisms and microorganisms; hull under high wave and alternating load; the ship shape processing method of complex factors such as, so the steel hull structure strict requirements. First of all, good toughness is the most critical requirement. Besides, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the ship inspection department. The strength grade of the structural steel used in the hull is divided into the general strength structural steel and the high strength structural steel according to the minimum yield point. Hull structural steel is divided into two kinds: general strength and high strength steel. The general strength steel is divided into four grades according to the quality: A, B, D and E. The high-strength steel is divided into two strength grades and three quality grades; AH32, DH32, EH32, AH36, DH36 and EH36.

The standard strength steel of China Classification Society is divided into four quality grades: A, B, C and D, namely, CCSA, CCSB, CCSC and CCSD. The high strength structural steel regulated by China Classification Society is three strength grade and four quality grade.

Classification according to the classification society, there are ABS, LR, GL, DNV, BV, NK, KR, RINA, CCS, etc.

The American Bureau of American Bureau of shipping (ABS, full name: American Bureau of Shipping) was founded in 1862, is a non-governmental organization, mainly dedicated to the public interest and the needs of customers, through the standard construction and operation design, development and validation of ocean related facilities, protection of life and property and environmental safety. The prominent feature of the ABS is to carry out the inspection of the US Navy's small and medium combat warships and military auxiliary ships.

So far, ABS's business scope to ships, marine engineering, boiler and pressure vessel, petroleum and chemical industry, power plant facilities, railway and port facilities, ship equipment and container inspection business, at the same time, also carried out around 14000, 18000, ISO9000 certification, SA8000, BSCI etc.. According to the ABS, the 2009 entry level ship was innovating high, reaching a total of 159 million 500 thousand tons. Robert D Sommerville, chairman and chief executive of the American classification society, described 2009 as the "very strong year of the growth of the entry level ships" by the American classification society. The first quarter of 2010 the United States CCS class ships continued strong growth, by the end of March reached a total of 162 million tons. In 2009 - during the recent grades of steel used in shipbuildingmarket, the U. S. ship class entry level ships exceeded 10 million tons, only 5% over the same period.

ABS Shanghai, Dalian, Guangzhou three big station, the other station belonging to three station management. ABS China's sites are all managed by Hongkong, with the Yokohama head office and the ABS Asia Pacific headquarters in Singapore.

ABS certification is a certificate issued by the ABS.

The British Lloyd (Lloyd 's Register of Shipping LR), also translated as Britain's Lloyd society is a society, the world's oldest, the large and long history in the world shipbuilding industry renowned, ship industry certification authority is internationally recognized, also has a good reputation in the industry, other aspects of the project.

It is mainly engaged in the formulation and publication of ship standards, the inspection of ships, the verification of ship energy, and the publication of shipbuilding rules. There are offices or surveyors in ports in many countries. It has been involved in the amendment of the ISO9000 standard and the amendment of the accreditation regulations. There are more than 30 representative offices all over the world, recruiting auditors and accreditation work in the local area.

It is controlled by a committee. It consists of representatives from shipowners, ships and machine manufacturers, steelmakers, insurers, London Insurance Association and shipowners' Association, as well as the technical committee of the Royal ship design and Construction Association.

Germanischer Lloyd (GL) was founded in 1867, is one of the world's largest and oldest society, is the world's leading all kinds of container ship classification society, more than 30% of global container fleet and almost half of the container by Germanischer Lloyd certification. The German Lloyd has more than 400 offices in more than 120 countries in the world, with more than 2000 employees. The German Lloyd since 1875, from the German prime minister to the Ministry of foreign affairs and the Ministry of transport, has been actively supporting the GL business, and the federal government as a special technology organization and attention.

Norway DET NORSKE VERITAS was founded in 1864. Its headquarters is located in Oslo, Norway capital. It is a leading professional risk management agency in the world, aiming at safeguarding life and property safety and protecting the environment. DNV provides all kinds of risk management and comprehensive evaluation and certification services for customers, mainly related to the classification of service, certification services, technical services, set up about 300 branches in 100 countries worldwide, more than 9000 employees worldwide, from 85 different countries and regions.

Veritas (Bureau Veritas, Bureau Veritas, Veritas group, France International Shipping Association), Bureau Veritas, referred to as BV, was founded in 1828, headquartered in Paris, is one of the International Association of classification societies 12 formal members, one of the world's leading certification inspection group.

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETCGrade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mmWidth : 1000mm-4000mmLength : 1000mm-20000mm

MOQ: 1 PCProduct type : Steel plateDelivery time : Promptly ( Stock) or 10-40 days (Production)Stock : AvailableMTC: Available

Delivery condition: AS REQUIREMENTS

Grade			C max					Si max					Mn								P max									S max					Als min
A													≥ 2.5C																						-
B																																			-
D
E
rade	Rm					Re(MPa) min			A% min			Akv/J min
	(MPa)														Thickness (mm)
															≤ 50					> 50-70						> 70-100
															L		C			L			C			L			C
A	400-520					235			22			20			-		-			34			24			41			27
B	400-520					235			22			0			27		20			34			24			41			27
D	400-520					235			22			-20			27		20			34			24			41			27
E	400-520					235			22			-40			27		20			34			24			41			27
Grade		C max		Si max			Mn			P max			S max			Als min			Ti max		Cu max			Cr			Ni			Mo		Nb			V	N
																								max			max			max						max
AH32
AH36
AH40
DH32
DH36
DH40
EH32
EH36
EH40
FH32
FH36
FH40
Grade			Rm		Re(MPa) min			A% min			Akv/J min
			(MPa)											Thickness (mm)
														≤ 50								> 50-70						> 70-100
														L				C				L			C			L			C
AH32			440-570		315			22			0			31				22				38			26			46			31
AH36			490-630		355			21			0			34				24				41			27			50			34
AH40			510-660		390			20			0			41				27				-
DH32			440-570		315			22			-20			31				22				38			26			46			31
DH36			490-630		355			21			-20			34				24				41			27			50			34
DH40			510-660		390			20			0			41				27				-
EH32			440-570		315			22			-40			31				22				38			26			46			31
EH36			490-630		355			21			-40			34				24				41			27			50			34
EH40			510-660		390			20			-20			41				27				-
FH32			440-570		315			22			-60			31				22				-			-			-			-
FH36			490-630		355			21			-60			34				24				-			-			-			-
FH40			510-660		390			20			-40			41				27				-

Other supplier products

	ASTM A537 / ASME SA537	ASTM A537 / ASME SA537 ASTM A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon SteeLASTM A537A537...
	Round Steel Bar	The round steel is divided into three kinds: hot rolling, forging and cold drawing. It is mainly used to make mechanical parts, seamless tube bille...
	ASTM A572 / ASME SA572	ASTM A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel ASTM A572/A572M Specification covers the st...
	EN10225	EN10225 Weldable Structural Steels for Fixed Offshore Structures. Technical Delivery Conditions BS EN 10225 specifies requirements for weldable st...
	Steel Plate	Mould steel plate is a kind of steel used to make mould of cold stamping mould, hot forging mould, casting mould and so on. Mold material is the ma...

供应产品

Same products

	Steel Searcher Steel Product & Hardware	卖方: STEEL SEARCHER HONG KONG LIMITED	Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ...
	Frac PU Layflat Hose	卖方: SUZHOU SEAPEAK CO.,LTD	The outer cover of our PU layflat hose has been produced with extra thickness for tough environme...
	SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber	卖方: Tengzhou Star Smith Metal Products Co.,Ltd	This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro...
	SDS Micro Copper Coated Steel Fiber	卖方: Tengzhou Star Smith Metal Products Co.,Ltd	Micro brass fibers are made of copper coated steel wire , which is the most important materials o...
	SDS Loose Hooked End Steel Fiber	卖方: Tengzhou Star Smith Metal Products Co.,Ltd	Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha...