Epoxy Powder Coating for Water Supply

Function & Application

This product belongs to the system of epoxy resin powder coating, in possession of outstanding corrosion-resistance, chemical-resistance and solvent-resistance, able to resist chemical corrosion by H2S, CO2, O2, acids, alkalis, organics, etc in transmission media and corrosion by such corrosive substances as ground water containing salt, organic acids produced by the micro-organism in earth, as well as protect water distribution apparatus, e.g. iron or steel pipes and storage tanks. Our products meet the hygienic requirements for protective materials in Standard for Safety Evaluation of Equipment and Protective Materials in Drinking Water System (2001).

The product is mainly used for inner antisepsis of iron or steel pipes for drinking water and intermediate water transmission and anticorrosion of drinking water valves. It is also applicable to inner antisepsis of steel storage tanks, sewage treatment works, wharfs and the equipment of chemical plants.


  1. Easy coating and convenient inspection for surface quality.

Major Components

Epoxy resin, phenolic curing agents, SiO2 and titanium dioxide.


  1. Coating method: high voltage electrostatic spraycoating, fluidized-bed spraycoating and roller coating.

1) Remove oil, rust and other loose precipitation and water, etc.

2) Sandblasting and shotblasting treatment to Sa2.5 level, depth of abrasion pattern 40-100μm and surface cleaning to white level. Fresh and used sand should be paintcoated evenly for a stable proportion.

3) Clean the inner surface of pipes.

4) Preheat workpiece at 180-230℃ normally, lower than 260℃ (to prevent oxidation).

5) The powder coating is applied to the surface of the workpiece. The coating thickness is 250-350μm .

6) Curing according to relevant requirements.

7) Coating cooling.

8) Surface inspection after the workpiece cools under 95℃.

9) Recoat the missing part.

Curing Instruction:

Powder coating is paintcoated on preheated workpiece and cure it according to relevant requirements for optimal performance. The curing time of unpreheated workpiece should be calculated once it reaches curing temperature.


Storage & Transportation:


Cartons for outer packing and polyethylene woven bags for inner lining, net weight 25kg.


至: Hebei PuLanke Industrial Technology Co.,Ltd
Your E-mail:

Send to other suppliers

Other supplier products

Weather Proof Double Layer Epoxy Compound Powder
Weather Proof Double Layer Epoxy Compound Powder Introduction The product is a kind of weather proof double layer heavy duty epoxy compound powder, comprises of two layers of primer and finishi...
polyethylene coated steel pipe
polyethylene coated steel pipe 3PE coating is based on Fusion Bonded Epoxy (FBE) as the bottom, the adhesive for the middle layer and extruded polyethylene for the outer shea...
Inside Epoxy Outside Polyethylene Coated Steel Pipe
Inside Epoxy Outside Polyethylene Coated Steel Pipe Inner epoxy outer polyethylene is a kind of coated steel pipe, use the technique of internal spray epoxy powder, outer shower coating with poly...
Inside and Outside Epoxy Coated Steel Pipe
Inside and Outside Epoxy Coated Steel Pipe Inside and outside epoxy to maximize the advantages of both steel pipe and plastic pipe. Not only have the mechanical properties of steel, hi...
Spiral Steel Pipe Supplier
Spiral Steel Pipe Supplier Spiral steel pipe is a strip steel as raw material, extrusion forming at normal temperature, automatic double wire double-sided submerged arc wel...

Same products

Steel-plastic Composite Pipe
Steel-plastic Composite Pipe 卖方: Hebei Tianchuang Pipe Co., Ltd Brief Introduction of Steel plastic Composite Pipe Hebei Tianchuang Pipe Co., Ltdis a profess...
Steel Pipe
Steel Pipe 卖方: Hebei Tianchuang Pipe Co., Ltd Steel pipes can be used to transport fluids and powdered solids, exchange heat, and make mechanic...
Scaffolding Pipe
Scaffolding Pipe 卖方: Hebei Tianchuang Pipe Co., Ltd Overview of Steel Scaffolding Scaffolding is a temporary structure used to support the original s...
S355JR steel pipe
S355JR steel pipe 卖方: Hebei Tianchuang Pipe Co., Ltd What is S355JR? S355JR is a useful structural grade steel with a minimum yield strength of 355 N...
S235JR steel pipe
S235JR steel pipe 卖方: Hebei Tianchuang Pipe Co., Ltd What is Grade S235JR Structural Steel? Structural steel is a standard building material made fro...