China Supplier Prime Hot Rolled SS400 Steel H Beams

China Supplier Prime Hot Rolled SS400 Steel H Beams

Product name:China SupplierPrime Hot Rolled SS400 Steel H Beams

Keywords: Steel H Beam

Standards: GB/ASTM/SS400/ST52

Material: Q195 Q235 Q345

Web Thickness: 10mm

Web Width: 150mm

Flange Thickness: 7mm

Flange Width: 150mm

Length: 12m

Technology: Hot rolled

Surface treatment: Black

Application: construction/welding /green house or water system

Container type: 20gp/gh or 40gp/gh

Loading capability: 25-27ton each container

Package type: Plastic caps on both ends, Steel bundle, Woven bag or according to customers' request

Payment terms:30%TT advanced and balanced pay before loading

Factory production ability: 10000ton monthly

Delivery time: within 15-20days

Loading port: TIANJIN port

H Beams

H Beams is an economical section and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Because all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is a new type of economic construction steel. The shape of theH Beamssection is economical and reasonable, and the mechanical properties are good. The points on the section are evenly extended and the internal stress is small during rolling. Compared with ordinary I-beams, it has the advantages of large section modulus, light weight, and metal saving. The structure is reduced by 30-40%; and because the inside and outside of the legs are parallel, and the leg ends are at right angles, the assembly and assembly into components can save welding and riveting workload by up to 25%. It is often used in large buildings (such as factory buildings, high-rise buildings, etc.) that require large load-bearing capacity and good cross-section stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, and foundation piles.

H-beam is economical cross-section steel with better cross-section mechanical properties, which is optimized and developed from I-beams. In particular, the cross-section is named after the English letter "H".

HGB H beamscharacteristics are as follows:

Classificationof H-beams

There are two types of hot-rolled H-beams and welded H-beams (H). Hot-rolled H-beamsare divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .

Applicationof H-beams

H-beam is economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beam in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.

Features ofH-beams

Compared with I-beam, the section modulus is large, and the metal can be saved by 10-15% when the load bearing conditions are the same.

With the same beam height, the steel structure can be 50% larger than the concrete structure, making the building layout more flexible.

Compared with the self-weight of the concrete structure, the self-weight of the structure is reduced, and the internal force of the structural design is reduced, which can reduce the requirements for the foundation treatment of the building structure, facilitate the construction, and reduce the cost.

Hot-rolled H-beam steel structure has a scientific and reasonable structure, good plasticity and flexibility, and high structural stability. It is suitable for building structures that can withstand large vibration and shock loads and has a strong resistance to natural disasters. Building structure in the earthquake zone. According to statistics, in the world's magnitude 7 or more devastating earthquake disasters, H Beams-based steel structures have suffered the least damage.

Compared with the concrete structure, the cross-sectional area of the steel structure column is small, which can increase the effective use area of the building. Depending on the form of the building, it can increase the effective use area by 4-6%.

Compared with welding H Beams, it can obviously save labor and materials, reduce the consumption of raw materials, energy and labor, low residual stress, good appearance and surface quality.

Easy to connect and install, easy to remove and reuse.

The use of H Beamscan effectively protect the environment, which is specifically manifested in three aspects: first, compared with concrete, dry construction can be used, which generates less noise and less dust; second, due to the reduction of its own weight, the amount of soil taken for foundation construction is small, and Small damage to land resources, in addition to reducing the amount of concrete, reducing the amount of rock excavation in the mountains, is conducive to the protection of the ecological environment; Third, after the service life of the building structure expires, the amount of solid waste generated after the structure is demolished is small, and the value of scrap steel resources is high.

Hot-rolled H-beam-based steel structureshave a high degree of industrial production, which is convenient for machine manufacturing, intensive production, high accuracy, easy installation, and easy quality assurance. It can be built into a real house manufacturing factory, bridge manufacturing factory, and industrial workshop manufacturing factory. The development of steel structures has created and driven the development of hundreds of emerging industries.

It has a small footprint and is suitable for all-weather construction, and is less affected by climatic conditions. The construction speed of a steel structure made of hot-rolled H Beamsis about 2-3 times the construction speed of a concrete structure, the capital turnover rate is doubled, the financial cost is reduced, and the investment is saved. Taking China's "Tallest Building" Shanghai Pudong's "Jinmao Tower" as an example, the structural main body with a height of nearly 400m has completed the structural cap in less than half a year, while the steel-concrete structure requires a two-year construction period.

We provide theseh-Beams, if you have any questions, please contact us on time!

Classification of H-beams

There are two types of hot-rolled H-beams and welded H-beams (H). Hot-rolled H-beams are divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .

Application of H-beams

H-beam is an economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beam in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.

Other supplier products

	Hot Rolled Steel Sheet	Product name:1.8*1000mm hot rolled steel coilsand sheets in stock Key words: hot rolled steel coils Standards: GB/ASTM/SS400/ST52 Material: Q195 ...
	welded pipe Cold Rolled Steel Coil	Product name:SPCC 0.3x1000mmcold rolled steel sheet/plate price Key words: cold rolled steel sheet Standards: GB/ASTM/SS400/ST52 Material: Q195 ...
	Factory Mild Steel Plate Corten Plate Alloy Plate	Product name:FactoryMild Steel PlateCorten Plate Alloy Plate Key words: Mild Steel Plate Standards: AISI, ASTM, BS, DIN, GB, JIS Material:...
	1.8*1000mm hot rolled steel coils and sheets in stock	Product name:1.8*1000mm hot rolled steel coilsand sheets in stock Key words: hot rolled steel coils Standards: GB/ASTM/SS400/ST52 Material: Q195 ...
	Hot Selling 80x40x20x2.5mm Galvanized C Beam Strut Steel C Channel	Product name:Hot Selling 80x40x20x2.5mm Galvanized C Beam Strut Steel C Channel Key words:Steel C Channel Standards: GB Material: Q195 Si...

供应产品

Same products

	API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling	卖方: Tianjin Wenxin Energy Technology Co.,LTD	Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
	L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint	卖方: Tianjin Wenxin Energy Technology Co.,LTD	Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
	Pup Joint 2-7/8"NUE N80 2FT Blast Joint	卖方: Tianjin Wenxin Energy Technology Co.,LTD	Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
	NC50 PIN 4145H XT39 BOX Crossover	卖方: Tianjin Wenxin Energy Technology Co.,LTD	IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh...
	API 5CT 2-7/8"NUE N80 Tubing Coupling	卖方: Tianjin Wenxin Energy Technology Co.,LTD	Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...