reflective heat shield sleeve
1000°F / 537°C Continuous Exposure: Higher Intermittent
reflective heat shield sleeve
Aluminum Coated Fiberglass Reflect Sleeveis made by braided fiberglass sleeve laminated aluminum foil.
Performance lab tested at 3000°F (1650°C) for 1 minute, BST Thermal Protective Aluminized Glass Fiber Heat Reflect Sleeve reflects at least 90% of radiant heat energy.
Fiberglass Reflect sleeve can be used to protect industrial wires, cables, hydraulics hoses, piping and tubing from radiant heat sources such as glowing steel slab, liquid metal pour stream, infrared heaters and other similar sources.
Performance lab tested at 3000°F (1650°C) for 1 minute, this sleeve reflects at least 90% of the radiant energy that hits its surface, keeping the underlying cables and hoses cool.
Aluminum Coated Fiberglass Reflect Sleeveis available in sizes from 2/5 " through 18,1/2 ".
Aluminum Coated Fiberglass Reflect Sleevecan be cut into required lengths. Larger sizes are available under special order.
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
See all heat reflective sleeve here
AluminumAramid Heat Reflective Sleeve with Velcro
AluminumAramid Heat Reflective Sleeve
Connector Heat Shield
Heat Reflective Sleeve with Snap
Heat Reflective Sleeve self-wrapped
Heat Reflective Sleeve sewn type
Polyester Aluminized Fiberglass Heat Reflective Sleeve
Aluminized Polyester Wool Heat Reflective Sleeve
Aluminized Polyester Wool Heat Reflective Sleeve sewn
Heat Reflective Sleeve Wrap
Heat Reflective Sleeve with Velcro
Polyester Aluminized Heat Reflective Sleeve
Aluminized Woven Fiberglass Heat Reflective Sleeve
Impregnated Aluminum Heat Reflective Sleeve
在线联系供应商
Other supplier products
 |
Engine Exhaust Insulation Blankets | Exhaust Insulation Blanketsis used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particu... |
 |
Fiberglass Silicone Rubber Sleeving | 500°F/260°CContinuous Exposure: Higher Intermittent Fiberglass Silicone Rubber Sleeving Aerospace AS1072 Grade Fire Sleeve was specially de... |
 |
Spark Plug Wires Heat Protectors | Spark Plug Wires Heat Protectorsprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfits ... |
 |
耐高温保护套管 | 耐高温保护套管种类 1.管筒式耐高温保护套管 一般适合保护较短或较平直的的管线，电缆保护，汽车线束，发电机组中常用，安装后牢靠，不易拆卸，密封，绝缘，隔热，防潮的效果较好。 2.缠绕式耐高温套管 主要用于阀门，弯曲管道等不规则被保护物的高温防护，缠绕方便，也适用于户外高温管道，如天然气... |
 |
nylon protective sleeve with velcro | BST-VNPS and BST-VHNPS nylon hose sleeve with velcrois made by nylon multifilament. The Velcro hook and loop closure allows for easy installation o... |
Same products
 |
Nylon Head Hot Dip Galvanized Spindle For Pin Insulator | 卖方: Electric Powertek Company Ltd | Insulator Crossarm PinsForged from one piece steel. The base distributes load and provides a firm... |
 |
ANSI C29.5 55-4M Pin Insulator for Bangldesh | 卖方: Electric Powertek Company Ltd | The 55-4m pin insulatoris an insulator used in power transmissionand distribution systems. It is ... |
 |
Ground Wire Glass Insulator | 卖方: Electric Powertek Company Ltd | Glass insulatorsare a crucial component in the insulation and support of overhead transmission li... |
 |
Phenolic Thermal Insulation Board | 卖方: Langfang Clear Chemical Building Materials Co., Ltd | Phenolic thermal insulation boardis an advanced rigid insulation material widely used in modern c... |
 |
"Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Turbine bolt electric heater ZJ-20-2 for thermal power plant YOYIK professional pr... |
