Silica Adhesive Backed Tape
High Silica Self-Adhesive Tapeis a slit silica tape constructed from 96% pure SiO2 silica fiber, coated one side with a pressure sensitive adhesive backing that facilitates installation. The adhesive decomposes at high temperatures, leaving a perfectly tape-wrapped hose, cable or pipe.
This High Temperature Resistant Adhesive Bakced Silica Tape is suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), Adhesive backed silica tape sets the standard for flexibility and minimum lineal shrinkage under high heat conditions.
Width 20 mm to 1000 mm. Normal width is 2" ( 50 mm) and 4" (100 mm ). Customs width is available.
High Temperature Resistant Adhesive Bakced Silica TapeQuick Facts
| Continuous operating temperature |
1800°F (982°C) |
| Max short term exposure |
3000°F (1650°C) |
| Molten splash resistance |
Good |
| Flame resistance |
Outstanding |
| Abrasion resistance |
Moderate |
| Flexibility |
Outstanding |
| Tensile strength |
Good |
| Width |
25 mm, 50 mm, 75 mm, 100 mm, customs width is available |
Other supplier products
|
|
Spark Plug Wire Heat Shield |
Spark Plug Wire Boot Protectorsprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfits m... |
|
|
high temperature basalt sleeve |
This high temperature basalt sleeveis made by texturized basalt yarns trap greater amounts of air and demonstrates better insulation properties and... |
|
|
Titanium Exhaust Wrap |
LAVA rock Exhaust Wrapis constructed from fragmentized lava rock that is extruded into the fibers to create a heat wrap that will give you strength... |
|
|
Texturized silica braided sleeve |
Texturized silica braided sleeve is made of 96% pure SiO2 texturized silica fiber yarn, it is suitable for continuous use at 2000F (1100C), and abl... |
|
|
heat sleeve |
500°F/260°C Continuous Exposure: Higher Intermittent
cable protection heat sleeve
Knitted high bulk glass fiber fire sleeve can withstand ... |
供应产品
Same products
