Fuel Line Heat Sleeve
Fire Protection Fibreglass Braided Sleeveis designed to protect hoses,wires and cables from the hazards of high heat and occasional flame.
Fire Sleeve protects continuously to 260??C/500??F and will withstand a molten splash at 1200??C/2200??F. Made of braided fiberglass yarns in a flexible substrate,it is then coated with a high grade silicone rubber.
Resistant to hydraulic fluids, Lubricating oils,and fuels, Silicone Sleeve insulates against energy loss in piping and hosing;protects employees from burns;and allows bunding of wires,hoses,and cables.
Fuel Line Heat Sleeve is the perfect cover to protect hydraulic hoses,pneumatic lines and wiring bundles.
Silicone coated fiberglass Fire Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000??F (1650??C).
Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product
Proudly Made By BST Thermal Protection Products Co.,Ltd
Other supplier products
|
|
Spark Plug Wire Heat Shield |
Spark Plug Boot Protectorsprotect your expensive plug wire set’s performance and increase their lifetime.Spark Plug Boot Protectorfits most b... |
|
|
Tank Insulation Blankets |
Removable & Reusable Insulation Blankets is used to insulate engine parts, exhaust piping and components, and industrial process piping and mac... |
|
|
Graphite black exhaust wrap |
Graphite black exhaust wrap withstands continuous heat up to 2000°F, and contains no asbestos.
Special coating provides more abrasion resistanc... |
|
|
silicone fiberglass fire sleeve with velcro |
500°F/260°C Continuous Exposure: Higher Intermittent
silicone fiberglass fire sleeve with velcro
silicone fiberglass fire sleeve with... |
|
|
high silica fabric |
high silica fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven sil... |
供应产品
Same products
