Silicone rubber coated fiberglass sleeve
500°F/260°CContinuous Exposure: Higher Intermittent
Silicone rubber coated fiberglass sleeve
Aerospace AS1072 Grade Fire Sleeve was specially developed to meet the fire resistance requirements of FAATSO - C53a OR TSO - C75.
Thermo Fire Braided Sleeve can withstand repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C).
Sheds splash immediately
Fiberglass Silicone Sleevingwithstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F (1650°C). The heavy coating of our proprietary iron oxide red silicone rubber compound sheds molten metal splash immediately, so very little heat transfer occurs.
Withstands intense radiant heat and flame
Fiberglass Silicone Sleevingwill withstand continuous exposure to 500° F (260°C); up to 2000°F (1090°C) for 15-20 minutes; and up to 3000°F (1650°C) for 15-30 seconds. When exposed to flame, the silicone rubber transforms into a crust, creating a protective SiO2 refractory layer.
Fiberglass Silicone Sleevingis constructed from high bulk glass fiber braided sleeve. Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes and cables in a variety of hostile environments.
Protect your personnel and cut your energy loss
Aerospace AS1072 Grade Fire Sleeve is insulation properties provide personnel with effective protection against burns from hot hoses and flexible steam lines, while reducing heat energy losses.
ProudlyMadeByBSTThermalProtectionProductsCo.,Ltd
| Inside diameter - mm | Inside diameter tolerance -mm | Thickness and tolerance - mm |
| 4-10 | ± 0.3 | 3.0± 0.2 |
| 12-18 | ± 0.4 | 3.5± 0.3 |
| 20-32 | ± 0.8 | 4.0± 0.4 |
| 35-55 | ± 1.0 | 4.3 ± 0.5 |
| 60-100 | ± 1.0 | 4.5 ± 0.5 |
| 105-150 | ± 1.0 | 5.5± 0.5 |
|
Thermo Fire Braided Sleeve- Quick Facts | |
|---|---|
|
Custom colours available by special order. |
|
|
Continuous operating temp: |
500°F (260°C) |
|
Max short term exposure: |
3000°F (1650°C) |
|
Molten splash resistance: |
Outstanding |
|
Flame resistance: |
Very good |
|
Abrasion resistance: |
Very good |
|
Flexibility: |
Outstanding |
|
Water and oil resistance: |
Outstanding |
在线联系供应商
Other supplier products
 |
Woven Silica Fabric | Woven Silica Fabricis suitable for use at 1800°F (982°C), and able to withstand short term exposure up to 3000°F (1650°C), woven si... |
 |
heat sleeve | 500°F/260°C Continuous Exposure: Higher Intermittent high temperature protection heat sleeve Knitted high bulk glass fiber tube protection... |
 |
High Temp Fiberglass Sleeve | 1000°F / 520°C Continuous Exposure: Higher Intermittent Fiberglass Tubing Sleeve This Braided Fiberglass Sleevewill conform to shapes with... |
 |
red fiberglass exhaust wrap | red colored exhaust wrapfeatures a color coating which not only gives your vehicle that custom look, but it also increases the life of the colored ... |
 |
剖分式高温套管 | 剖分式高温套管是由高品质无碱玻璃纤维纱编织成管后，涂以有机耐高温硅树脂经高温处理而成。耐高温套管具有阻燃、隔热、保温、抗电、柔软等性能。耐高温套管主要应用于钢铁厂、冶炼厂、玻璃厂、消防设备、大型变压场所等高温场所的电缆绝缘保护。 剖分式高温套管广泛应用于电力、化工、冶金、船舶、机械制造及其它行... |
Same products
 |
Velcro Heat Sleeve | 卖方: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone fire sleeveprovides the same protection against extreme heat conditions and occa... |
 |
Silicone Coated Fiberglass Tape | 卖方: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone fiberglass tapeprovides the same protection against extreme heat conditions and ... |
 |
Silicone Coated Fiberglass Hose Fire Sleeve | 卖方: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone heat sleeveis specialized in protecting wires, cables, hoses, oil lines from ext... |
 |
Silicone Coated Basalt Sleeve | 卖方: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE silicone coated fiberglass sleeveis specialized in protecting wires, cables, hoses, oil l... |
 |
Nylon Sleeve For Wires | 卖方: Ningguo Xinmao Fiberglass Products Co., Ltd. | QIAN-ZE Nylon sleeve for wiresis specialized in protecting wires, cables, hoses, oil lines from h... |
