Rotary Piling Rig XR180DII
Product Description
Features：
It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability;
It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost;
Cummins electric control turbo-supercharged engine is used. It complies with Euro III emission standard ,In addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard;
Using full electronic control technology of CAN bus, Improves the reliability of the whole vehicle and simplify hydraulic line, Fully reflects the people, machine, electricity and liquid integration;
Winch-crowd and sleeve-driven functions are available for selection to CFA, hydraulic casing oscillator, DTH hammer satisfy various needs of the users;
It is equipped with a centralized lubrication system as standard configuration; maintenance is easier;
The machine obtains CE certfication of TüV Rheinland group.
|
Engine |
Model |
CUMMINS QSB6.7-C260 |
|
|
Rated power |
kW |
194 |
|
|
Rotary drive |
KN . m |
180 |
|
|
Rotary speed |
r/min |
6~33 |
|
|
mm |
￠1600 |
||
|
m |
60 |
||
|
Crowd cylinder |
kN |
160 |
|
|
kN |
180 |
||
|
m |
5 |
||
|
Crowd winch |
kN |
210 |
|
|
kN |
210 |
||
|
m |
13 |
||
|
Main winch |
kN |
180 |
|
|
m/min |
65 |
||
|
Auxiliary winch |
kN |
50 |
|
|
m/min |
70 |
||
|
Mast rake side/forwards/backwards |
±3°/5°/15° |
||
|
Undercarriage |
Km/h |
||
|
% |
35 |
||
|
mm |
350 |
||
|
Track shoe width |
mm |
700 |
|
|
Distance between tracks |
mm |
2960~4200 |
|
|
Hydraulic system |
Working pressure |
Mpa |
35 |
|
Overall drilling weight |
t |
63 |
|
|
Dimension |
Working condition |
mm |
8350x4200x20480 |
|
Transportation condition |
mm |
14380x3000x3490 |
|
在线联系供应商
Other supplier products
 |
Rotary Piling Rig XR220DII | Product Description The machine adapt single row rope for main winch to figure out the wear of steel rope. and extend the life-span. With inf... |
 |
Soilmec | Product Description Max torque: 210 kN.m Max depth: 80m Max diameter:2500mm Condition: very good Product Description Year of made: 20... |
 |
Horizontal Directional Drill XZ320E | Product Description ，drilling box can accommodate 40 pieces of drill pipes，ensure one time reached 120 meters，efficient automation con... |
 |
Squeezing Under Reamer | Squeezing under reamer is commonly used in pile drilling. It works by the hydraulic power from the , and can enlarge the drilling hole during t... |
 |
Rotary Piling Rig XCMG XR150DIII | Product Description Features: Main Parameters: Engine Model CUMMINS QSB7-C202 Rated power kW 150 ... |
Same products
 |
AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度：2670毫米 整车尺寸（长*宽*高）：5700*2000*2670毫米 前轮配重：4250毫米 轴距：2500毫米 离地间隙：480毫米 最大卸料高度：3500毫米 最大... |
 |
Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
