High-performance split-type pneumatic drilling rig
380-DTHis a high-performance split-type pneumatic drilling rig developed and manufactured by Taiye Drilling Rig in accordance with the "low-cost, high-efficiency" industry requirements of the drilling industry.
380-DTH integrates the advanced technology of the current split pneumatic drilling rig. The prototype has passed over 3000 hours of destructive operation experiments and 4 kinds of field tests in different geological environments. It has improved more than 10 mechanical loopholes. Finally, the three key technical problems of the previous “high failure rate, high wind consumption, and high use cost” of the split-type pneumatic drilling rig were solved. The result is an easy-to-operate low-maintenance split-type pneumatic drill with low maintenance costs, low wind requirements, and high drilling speed.
Technical Features
Rotary reducer
The high-strength running mechanism provides strength and durability for the whole machine. The surfaces of the drive wheels, guide wheels, track rollers, and track pads are all specially wear-resistant. The drive is strong and the adaptability is good, enabling the equipment to be used in complex terrain Maintain a stable walking posture. Use one-time oil lubrication to avoid the tedious of frequent maintenance and maintenance during use.
The ergonomically designed integrated control console integrates hydraulic actuators, drilling systems, etc. in one place to optimize operability and operating efficiency. The body is equipped with a foldable detachable operation pedal to meet the requirements of single-person operation.
The new structure of the mechanical arm mechanism expands the drilling direction and working range through five coupling mechanisms and hydraulic oil cylinders. Extended carriage, manganese steel slide rail and multi-group roller design skateboard can withstand large torque, resist deformation, and extend the service life of the carriage.
Performance Parameters
|
Drilling hole diameter |
90-165mm |
|
Max actual air pressure |
|
|
Air consumption |
|
|
Turning torque |
|
|
Turning speed |
70Rpm |
|
Pushing lenght |
3980mm |
|
Maximum pushing force |
11KN |
|
Sliding frame swing |
Left 47°/Right 54° |
|
Drilling boom swing |
Left 40°/Right 40° |
|
Drilling boom pitching |
horizontal 23°/46° |
|
Grade ability |
35° |
|
Feeding motor power |
|
|
Dimension |
6100*2360*2105mm |
|
Weight |
5400kg |
HBXG is the pioneer of the track bulldozer manufacture in China. Now it has become a state-owned public company, a leading manufacturer of.We have Bulldozer,, Track Bulldozer,, Hydraulic Direct Drive Bulldozer,, Wheel Excavator, Excavator,, Track Loader,.
在线联系供应商
Other supplier products
 |
Total Hydraulic Controlled Bulldozer Used For Irrigation Engineering | Technical Features SD9 bulldozer: Crawler bulldozer with elastic suspension, hydromechanical transmission, high drive, and full hydraulic control.... |
 |
Semi-rigid suspended bulldozer Used For transportation construction | Technical Features SD7Kis semi-rigid suspended, elevated sprocket, the tier III electronic control engine, hydro-static transmission infinitely va... |
 |
Water Cleaning Amphibious Vehicle | The Water Cleaning Amphibious Vehicleis an advanced intelligent equipment for wetland management in China, which can effectively reduce the intensi... |
 |
Track Bulldozer Pilot Hydraulic Blade Control Bulldozer | Technical Features :TY165-3 bulldozer is 165 horsepower track-type dozer with hydraulic direct drive, semi-rigid suspended and hydraulic assisting... |
 |
SD6K hydraulic bulldozer | SD6K is the track-type total hydraulic bulldozerwith semi-rigid suspended, electronic control tier Ⅲ, dual-circuits electronic control hydrostatic ... |
Same products
 |
AEMK 588 Loader | 卖方: 烟台欣祥国际贸易有限公司 | 驾驶室高度：2670毫米 整车尺寸（长*宽*高）：5700*2000*2670毫米 前轮配重：4250毫米 轴距：2500毫米 离地间隙：480毫米 最大卸料高度：3500毫米 最大... |
 |
Quick Change Worktable | 卖方: Nextas Co.,Ltd | Quick Change Worktable Zero Point Pneumatic Chuck Zero Point Positioning Datum System NE... |
 |
Self Centering Vise | 卖方: Nextas Co.,Ltd | Self Centering Vise Key Advantages High precision: repeatability as tight as ≤ 0.005 mm ... |
 |
BDS Positioning Chuck | 卖方: Nextas Co.,Ltd | BDS Positioning Chuck Self Centering Vise Self-centering vise is a type of workholding tool that... |
 |
Quick Change Pallet System | 卖方: Nextas Co.,Ltd | Quick Change Pallet System Quick Change Pallet System Quick Change Pallet System delivers m... |
