Professional 600 ton precast concrete segment lifter used balanced cantilever method for bridge construction
Product Description
We have been designing, supplying and operating segmental lifter (also known as a launching gantry or launching grider) since 2008. Our 600 ton precast concrete segment lifterhave been used to erect the decks of suspension bridges, cable stay bridges and land/sea viaducts in both steel and concrete.We offer a complete design and supply service, with site supervision to assist and train our client's site team to assemble, commission, operate and maintain the gantries. We are also happy to pass the steel fabrication drawings to our clients so they may fabricate the steelwork themselves local to the project site to save costs.
Each of 600 ton precast concrete segment lifter is designed specifically to meet the loads and geometry of each project, and to arrive at the most cost effective overall solution when considering the cost of the gantry, the erection schedule, the labour required to operate, the erection loads on the permanent works and future re-use value.
Safety Features
600 ton precast concrete segment lifterare designed for safety. Winches are equipped with double breaking system. Upon request we provide Triple breaking system. Emergency stop button, Limit switch, sensor are located at designated location.
1. Have the function to monitor and record operation status of segmental lifter, the data could be recorded in local monitor and stored in the remote server to meet the demand on accidents analysis of segmental lifter;
2. Have the function to monitor wind velocity in the real time, which reminds driver to operate the segmental lifter safely.
3. Have the function of long distance monitoring on safety state of swgmental lifter at real time, which could meet the demand on remote management.
Packing & Delivery
1. Delivery time
Within 30 to 40 days after receiving the receipt of deposit.
2. Packaging
Wood case for electric parts, accessories; large sections will be loaded onto bulk cargo ship after packing.
3. Transportation
Generally 35 days to 50 days to destination port.
在线联系供应商
Other supplier products
 |
railway suspension bridge erecting beam launcher crane 180t 200t | railway suspension bridge erecting beam launcher crane 180t 200tis used in the erection of precast beam bridges for span by span method of construc... |
 |
公路工程分段装配式混凝土1500吨启闭龙门机 | 产品描述 分段装配混凝土1500T启闭龙门机 采用1500T分段装配式混凝土下水龙门机，施工跨度可达60m。它的设计和制造是为了确保高性能、高效率、安全性、灵活性和多次连续使用。 1.独立支持搬迁系统。 2.独立的受力平台处理系统。 3.桥式吊车的服务。 4.所有歌剧的无线电遥控。 5.无线电... |
 |
900 ton erection girder railway launching girder manufacturer for precast installation | Product Description 900 ton erection girder railway launching girder manufactureris generally used in the erection of the Highway Bridge and Subwa... |
 |
室内外用欧式高架起重机 | 产品描述 欧洲式高架起重机，用于室内或室外，有时也称为桥式起重机和eot起重机。eot起重机是一种起重机或绞车沿着桥在平行的跑道之间移动。它们的设计是为了满足中、重型工业的起重要求，涵盖了制造过程的所有部分。 一般情况下，桥式起重机可分为单梁桥式起重机和双梁桥式起重机两种。 室内外用欧式高架起... |
|
|
大型起重机专用交流220v电缆牵引电动绞车 | 大型起重机专用交流220v电缆牵引电动绞车 定制交流220伏电缆拉电动绞车大型起重机,大多数时间,follow-operated的人在地面上,还可以在房间里,或与无线操作类型与方式,除了专用,也可搭配使用电车和纯电车,有轨电车,这些手推车结构简单、重量轻、容易装卸,永远这样可以使用,但也可以暂... |
Same products
 |
Column type folding arm crane | 卖方: HEBEI KUNDA HOISTING EQUIPMENT CO., LTD | BASIC INTRODUCTION Product Name: TOYO Column type folding arm crane Key Component: Equipped wit... |
 |
Excavator Crane Jib | 卖方: Longhe Intelligent Equipment Manufacturing Co., Ltd | Excavator Crane Jib Product Description The is designed with a focus on safety and reliability.... |
 |
708-8F-31174最终驱动减速器，用于小松PC200-8 | 卖方: A&S Construction Machinery Co., Ltd. | A&S工程机械有限公司提供各种型号的减速机。 我们可以提供所有品牌的减速机:CAT减速机、小松减速机、约翰迪尔减速机、三一减速机、徐工减速机、沃尔沃减速机、日立减速机、住友减速机、利勃... |
 |
Customized Single Beam / Double Beam Bridge Crane | 卖方: 昆峰重工(苏州)有限公司(KFCRANE) | TYPE Single Beam / Double Beam Overhead Crane Tonnage 1T | 2T | 3T | 5... |
 |
40吨多功能轮胎式门式起重机出售 | 卖方: 河南华德智能装备有限公司 | 概述：Huadelift 自豪地推出 40 吨多功能龙门式直升机，这是一个尖端解决方案，旨在重新定义搬运搬运的效率和规定标准。该火箭旨在集成到各种工业环境中，提供多功能且可靠的重新解决方案。 ... |
