HYDRAULIC SHEARING MACHINE
The tube shearing machineis a type of industrial machinery used for cutting sheets of metal or other materials. It uses hydraulic power to drive a cutting blade, which is moved against a fixed blade to create a clean, straight cut.
As one of the most experienced hydraulic shear manufacturers, Hangzhou Roll Forming Technology Co., Ltd. has high-quality hydraulic shearing machine for sale. Welcome to contact us for more information, if needed.
- hydraulic angle shearare divided into gantry shears and throat shears according to the structure. The disc cutter shearing machine is divided into a disc shearing machine, roller shearing machine, multi-disc shearing machine, and rotary trimming shearing machine according to the structure.
- shear forming machineis divided into the following types according to the trajectory of the knife holder:
(1) The knife holder moves along the vertical line, because there is no forward inclination, so the upper blade section must be processed into a diamond shape, so there are only two edges (a rectangular blade with four edges is also available, but the cutting quality is poor). The fracture of the hydraulic metal shear for saleis not at right angles to the board surface.
(2) The knife holder moves along the forward inclined line (the angle between the vertical line and the vertical line is 1 ° 30 ′ ～ 2 °). The upper blade section can be processed into a rectangular shape with four blades. The shear fracture is basically at right angles to the board surface.
(3) The blade holder swings along the arc, and the cutting blade section should be processed into a diamond shape, so there are only two blades. Since the upper blade is slightly forward during the cutting process, the cutting quality and the blade holder are inclined forward. Linear motion is similar.
(4) The tool holder swings along the arc, and the forward inclination angle can reach 300, so the welding groove can be cut out.
HZrollforming, as a professional tube mill manufacturer, offers a wide range of tube roll forming machinefor you to choose from.
在线联系供应商
Other supplier products
 |
Guardrail roll forming machine | Hangzhou Roll Forming Technology Co., Ltd is a professional manufacturer and exporter of all kinds of standard and non-standard cold roll forming l... |
 |
Garage Door Guide Rail Roll Forming Machine | This series of garage door roll former is used to make various guide rails. A guide rail is a device or mechanism to direct products, vehicles, or ... |
 |
High Speed Roofing Tile Making Machine | The high-speed metal roof tile machine is for continuously roll forming and pressing step tilessheets. Thesteplength of this series can be set up a... |
 |
Slitting Line | Thesteel slitting lineis used for slitting wide steel coils into certain width strips coils. On the upper/lower blade axle of the steel coil slitti... |
 |
Single Side Manual Decoiler | SINGLE SIDE MANUAL DECOILER Specifications ofSingle Side Manual Decoiler Capacity 2t/2.5t/3t/5t is optional Extension m... |
Same products
 |
Custom Seamless Rolled Ring Forging | 卖方: Shandong Runchi Machinery Technology Co., Ltd | Custom Seamless Rolled Ring Forging Mechanical properties: Deformation temperature: Hot forging... |
 |
Cable Pulling Sock | 卖方: 00000 | Cable Pulling Sock CABLE PULLING SOCK: The is the most ideal tool designed for electrical a... |
 |
Side Dragging Cable Grip | 卖方: 00000 | Side Dragging Cable Grip Side Dragging Cable Grip SGA/MGT/SK/MK is also called cable sock w... |
 |
Cable Pulling Grips TG MG TGM TGK | 卖方: 00000 | Cable Pulling Grips TG MG TGM TGK Head Traction Cable Grip TG/MG/TGM/TGK Cable grips are a ... |
 |
Cable Grip Supplier | 卖方: 00000 | Cable Grip Supplier Cable Grip: A Reliable Solution for Safe Cable Pulling and Handling A... |
