Completed Spiral Welded Tube Mill

DescriptionThe max 3000-120 inch series of machine is used to produce the low-pressure transporting pipe and structure pipes. The spiral welded pipe mill is equipped with a whole spiral welded pipe line and necessary finishing equipment.Material:hot roll or slitting cut steel coil

Specifications of the Welded Pipe Mill

Coil OD	Φ1500-2000mm
ID	Φ610-760mm
	100-2000mm
Thickness	10-2000mm
Material	Normal carbon steel,low carbon steel Max yield strength is less than 48kg/mm2480Mpa-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm)
Side Curvature	≤10mm/10m
Tower	＜30mm
Max Weight	40T

Product Parameters:

Pipe Diameter	Φ610-Φ3048mm (24inch-120 inch)
Thickness	10-25.4mm Max yield strength is less than 48kg/mm2-X70 API HR Q235, Q345, X42-X70(X70≤19.1,Q235≤25.4mm
Helix angle	45°-78°
Maxpipe thread pitch	2400mm
Length	8-12m
Configuration	One set 40T crane and the other20T crane
Capacity	~1600KW(Including the beveller,testers ,welders and so on)

Parameters and Flow of ProcessParameters

Front Swiveling	Left Helix
Forming Form	Three rollers outside controlled
Positioning Form	CenterPosition
Welding Speed
Feeding Speed
Welding Mode	double sides submerged arc welding
Inside Welded Machine Outside Welded Machine	(2 nozzles) I: DC-1500 ⅡAC-1200(t≥12.7mm) (2 nozzles) I: DC-1500 II: AC-1200(t≥12.7mm)
Front Swiveling	Left Helix

Working Process of the Spiral Welded Pipe Mill:(coil car) → (uncoil) → (aligning) → (5 roll leveling) → (aligning) → (shearing and cross welding) → (aligning) → (milling) → (aligning) → milling→ (aligning) → (steel plate cleaning) → (driving) → (pre-bending) → forming → (inside welding) → (outside welding) → (cut to length) → (output distributing) → (on-line UT testing) → (welding flux disposing) → (X-ray testing) → (end-facing) → (hydro-static testing) → (collecting&storage)

Other supplier products

	End Facing and Beveling Machine	DescriptionFlat head chamfering machine is mainly used for flatting the end of spiral welded pipe and finish the edges. This pipe end beveling ma...
	Straight Seam Submerged-Arc Welded Pipe Mill	Description Straight seam submerged-arc welded pipe mill is a newly developed product. It is the patented product of our company. CFOE mill is c...
	Tube Straightening Machine	DescriptionTube straightening machine is mainly used to straighten metal profiles, rods, tubes and wire rods. It changes the straightness of bar ...
	Cut to Length Line	DescriptionCut to length production line is made up of coil car, decoiler, entry support device, width adjustor device, leveling machine, gauge t...
	Spiral Welded Pipe Mill	DescriptionSpiral welded pipe production line is mainly used to produce spiral steel pipes. The steel coils are unfolded and leveled by the spira...

供应产品

Same products

	全自动开料机 GT-ACT29	卖方: 肇庆古雷特科技有限公司	自动管材切割机用于自动切割加热元件的管材。主要用于大规模生产中的加热器制造。适用于铜管、铁管、不锈钢管、铝管等。*主要详情1. 自动送料、切割、断管和自动卸管。2. 可以裁剪成两种不同的长度。3...
	Anti-corrosion SSAW Steel Pipe	卖方: HEBEI TIRICO PIPELINE CO.,LTD	Anti-corrosion SSAW Steel Pipe Anti-corrosion steel pipes are used in petroleum, chemical, gas, ...
	1435mm 数显轨距尺	卖方: 武汉联科瑞际轨道设备有限公司	铁路数显轨距尺主要用于铁路线路轨距、超高、查照间隔、护背距离 的测量。可供工务维修、大修、工程测量及其他有关部门线路作业时使用。 该仪器测量速度快、使用方便，白天、夜间均可使用，是工务、工程部门...
	NE-1525 Featuring Automatic Reset Battery Hydraulic Pipe Plumbing Tool	卖方: Zhejiang Huaqi Information Technology Co., LTD	● The automatic reset battery hydraulic pipe crimping tool is an industry- solution designed for ...
	DC series high efficiency european jaw crusher	卖方: Shanghai Dongmeng Road and Bridge Machinery Co., Ltd.	Jaw crusher is widely used in ore crushing, construction aggregate production, construction waste...